Not So Pro 3

[Stump Shot]

Good morning fellas. Been awhile, what did I miss? It was a nice 2 week vacation at the land.

Slacker!

 

[cuinrearview]

Not when a gas unit is $2K cheaper to buy, besides I'm filling 5 x 5 gallon jerry cans at a time right now, why would I vary that...

How many seasons does 25 gallons last you?

Also, Justin cares not about the cost so neither should you

 

[3browns]

How many seasons does 25 gallons last you?

Also, Justin cares not about the cost so neither should you

Can't hide money, eh...

 

[p61 western]

Good afternoon fellas

 

[Loony661]

Friends / associates / miscreants however you want to be addressed I need some advice. I think the time has come to give up on the idea that I want to walk my lawn mowing, it’s time to drive. Half acre lot with some slope, tractor or zero-turn. I figure max deck size that makes sense if a 42”.

Recommendations? Horror stories?

In my experiences as a former Lawn Tech for John Deere, 48” seems to be the sweet spot for deck width. The triple blade 48” is just an all around nicer cutting setup than decks larger or smaller. Zero turn is much faster in overall time to cut the lawn, and it sounds like you are trying to save time. Tractor may be more useful if you want to add a snowblower attachment, etc down the road.

 

[Woodwackr]

Friends / associates / miscreants however you want to be addressed I need some advice. I think the time has come to give up on the idea that I want to walk my lawn mowing, it’s time to drive. Half acre lot with some slope, tractor or zero-turn. I figure max deck size that makes sense if a 42”.

Recommendations? Horror stories?

Horse

 

[Tor R]

Good afternoon suckers,

the tractor has started, so far no leaks.
Now I'm just hoping that one of you monkeys can recommend good headlights for a Massey Ferguson 42xx, 43xx

 

[GCJenks204]

How many seasons does 25 gallons last you?

Also, Justin cares not about the cost so neither should you

About 1 weekend in the boat…

Justin cares, he sent me $288.75 today as my quarterly carbon tax rebate…

 

[Mastermind]

In my experiences as a former Lawn Tech for John Deere, 48” seems to be the sweet spot for deck width. The triple blade 48” is just an all around nicer cutting setup than decks larger or smaller. Zero turn is much faster in overall time to cut the lawn, and it sounds like you are trying to save time. Tractor may be more useful if you want to add a snowblower attachment, etc down the road.

We have a 24HP Gravely with a 48" deck. Bad mfer.

 

[3browns]

Friends / associates / miscreants however you want to be addressed I need some advice. I think the time has come to give up on the idea that I want to walk my lawn mowing, it’s time to drive. Half acre lot with some slope, tractor or zero-turn. I figure max deck size that makes sense if a 42”.

Recommendations? Horror stories?

Heck, I mow almost a half acre with a 22" self propelled push mower

Can't hide poverty

 

[cuinrearview]

About 1 weekend in the boat…

Justin cares, he sent me $288.75 today as my quarterly carbon tax rebate…

I have a feeling you're fugged this quarter. Just think of the droughts in TN you're causing with that boat

 

[Kiwioilboiler]

Morena E Hoas.

 

[Kiwioilboiler]

Good afternoon suckers,

the tractor has started, so far no leaks.
Now I'm just hoping that one of you monkeys can recommend good headlights for a Massey Ferguson 42xx, 43xx

What size or any other info about these headlights Tor?
We have pretty good JWSpeaker stuff that fits CNH and John Deere, but whether you'd even find them in Europe?

 

[Tor R]

What size or any other info about these headlights Tor?
We have pretty good JWSpeaker stuff that fits CNH and John Deere, but whether you'd even find them in Europe?

Massey Ferguson 4355

 

[3browns]

Massey Ferguson 4355

Are you wanting to replace the existing bulbs or completely replace the headlight assembly

I know ZERO about tractor's but depending on the setup if it is a common headlight bulb base you could probably find an appropriate retrofit kit on Amazon

 

[JoeDirt]

If the federals stop by. You don't know me. Thanks bro.

I'm telling them you taught the class Mr. Teacher.

I'd bet you'll have visitors, eventually...

I’d be surprised if not.

Maybe so, but I don't know that I have any useful information. He never spoke about guns or politics, or even anything violent. He was one of the more intelligent people in the class, but not genius-freak level smart.

 

[full chizel]

I didn’t see or hear anything and don’t know anybody.

 

[Wonkydonkey]

Good evening guys

My favourite and the one I use most often is the last one in this video, however I’ve used most of the other with good effect

 

[Kiwioilboiler]

Are you wanting to replace the existing bulbs or completely replace the headlight assembly

I know ZERO about tractor's but depending on the setup if it is a common headlight bulb base you could probably find an appropriate retrofit kit on Amazon

Not a recommendation, but 3 secs on the www...

https://www.google.com/url?sa=t&source=web&rct=j&opi=89978449&url=https://agrilineproducts.com/massey-ferguson/4200-4300-series/4355/tractor-led-light-kits&ved=2ahUKEwi58seG8qmHAxVmklYBHTRjC78QFnoECCwQAQ&usg=AOvVaw29kCUtOw4PiYQzE_EMrof8

 

[Czed]

I try to avoid buying anything other than steel bar, I'm so clumsy when chopping that it's good to have one bar that is elastic without permanently bending lol

TsuMura comes with a premium bar for the K095 mount as well, as does Cannonbar with Duralite. They just haven't hit the market yet.
Both of these brands are known to have delivery problems.

Good times for those of us who feel finished with laminated bars.

It's hard to bend a 13" bar Tor

I bought several of these copy light bar's
They were 40.00 with chains are solid bar's with cutouts
Seem fine I've cut some with them
I bought several of these versacuts year's ago and they have held up good over the year's they run about 50.00 for a 24"
I haven't tried any of the versacut shorter bar's i need some k095s for saws I'm selling.