Not So Pro 3

[Slumberjack]

i dont know of any torch that uses gasoline
we use oxy acetylene torches and air lances

 

[Slumberjack]

Petrogen makes cutting torch setups that use gasoline, diesel, kerosene. Ain’t so damn sure I’d wanna be on the wrong end of one though.

Ya I don’t want anything to do with them.

 

[Saw Collector]

i dont know of any torch that uses gasoline
we use oxy acetylene torches and air lances

Is the air lance the same as air arc?

 

[Saw Collector]

You fellas think acetylene is any safer than gas? Both a bit flammable and a potential bomb.

 

[Slumberjack]

You fellas think acetylene is any safer than gas? Both a bit flammable and a potential bomb.

Popback from being able to cut thicker material is what bothers me

 

[full chizel]

Is the air lance the same as air arc?

That *s-word is loud

 

[41FanForLife]

Lots of wildlife in my buddies yard this afternoon.

 

[Saw Collector]

That *s-word is loud

Damn straight it is. Loud as fork

 

[full chizel]

Lots of wildlife in my buddies yard this afternoon.View attachment 283421View attachment 283422

You could get both of them deer in 1 shot

 

[dall]

Is the air lance the same as air arc?

no its different

 

[dall]

Is the air lance the same as air arc?

 

[Saw Collector]

no its different

I'll look it up.

 

[Saw Collector]

Or that

 

[dall]

i usually run my arc gouge about 30 to 45 degrees and i like the solid round rod
the flat ones suck
i actually enjoy arc gouging and have gotten good at it

 

[dall]

I'll look it up.

air lance is more for total destruction or severing thick stuff
arc gouge is for cutting out weld or cutting thin stainless as a torch wont cut stainless if its a good grade

 

[Saw Collector]

i usually run my arc gouge about 30 to 45 degrees and i like the solid round rod
the flat ones suck
i actually enjoy arc gouging and have gotten good at it

There was a guy at a place I worked. He was the weld eraser for those that effed up or the engeneers changed their minds.

 

[Stump Shot]

Cold spell sure gobbled up the wood.


Has to bust the snow and ice off the holz hausen.


Griz's 640 T'nT dropped a cylinder, will have to diagnose.

 

[dall]

There was a guy at a place I worked. He was the weld eraser for those that effed up or the engeneers changed their minds.

lol i usually volunteer to do the arc gouging or plasma cutting
we use the arc gouge mostly on big headers where the tubes are welded into as there is a flat seat that is machined and if get into that seat it causes alot more work so you have to know what you are doing

 

[Stihl working Hard]

It's not fixed. It just decided to not go dead.

It's a mix of warranty and customer pay.

What a PITA

 

[Stihl working Hard]

We aren't in a full lockdown but have all kinds of restrictions still. Travel is the biggest issue right now, can't leave our province without having to do a 14 day quarantine upon return.

We are pretty much the same Iam missing international travel though