No PPE and is bar going to be in a bind?

[Jeffbecky1]

What’s going to happen?

 

[CapitaineHaddoc]

There's a lot of guys working without PPE, and it's hard to guess what's gonna happen without the whole tree on the pic.

 

[Jeffbecky1]

There's a lot of guys working without PPE, and it's hard to guess what's gonna happen without the whole tree on the pic.

True, at first glance it appears to be a cut in the middle of a large tree

 

[Czed]

View attachment 287435 What’s going to happen?View attachment 287435

He has a 2 series
He's fine.

 

[Duce]

If it's supported at both ends, believe it's going to pinch hard. Time to grab another saw, or drive a couple wedges in it.

 

[Czed]

If it's supported at both ends, believe it's going to pinch hard. Time to grab another saw, or drive a couple wedges in it.

He's a outboard clutch front tensioner man
He knows what he's doing.
All the kids now are spoiled by inboard clutches and tactical chain tensioners
On the clutch cover.

 

[Hinerman]

True, at first glance it appears to be a cut in the middle of a large tree

With guns like his, he could just lift the tree if he gets pinched. My guess is he knows what he is doing but who knows...

 

[jacob j.]

Never underestimate a hillbilly in bibs...

 

[Thumper88]

If it was me I would cut to about right there, slap in a wedge and then undercut it. And im not exactly the most faithful PPE wearer on the planet

 

[cus_deluxe]

tactical chain tensioners

that made me laugh

 

[Wood Chopper]

Maybe he will pull out?


Sent from my iPhone using Tapatalk

 

[dgb84]

Maybe he will pull out?


Sent from my iPhone using Tapatalk

You never ever ever pull out, buddy. Balls deep til the end.

 

[jetsam]

Maybe he will pull out?


Sent from my iPhone using Tapatalk

You can't get your bar pinched if you just give her the tip

 

[Stevetheboatguy]

Never underestimate a hillbilly in bibs...

TRUTH!!!


Best answer JJ



Steven

 

[Ryan Browne]

He's got his safety squints on.

 

[jetsam]

I bet he didn't actually bind it up.

The saw isn't new, it has an aftermarket bar, and it's throwing chips instead of sawdust. So he's probably cut wood before, unless it's a borrowed saw.

 

[Eduardo K]

Never underestimate a hillbilly in bibs...

I’ve been ribbing the wife for a while that I was going to start wearing bibs. I like that sweet “moonshiner” look - bibs and no shirt.

Who makes good bibs and how does one go about finding the right size, anyone know?

 

[Wood Chopper]

Not sure. I bet they keep the wood chips out of your drawers betterer though. Theres got to be a guide to overalls someplace.


Sent from my iPhone using Tapatalk

 

[Skeans1]

Never underestimate a hillbilly in bibs...

They’re missing out on rigging rat style either tins or high waters with a snoose can ring.


Sent from my iPhone using Tapatalk

 

[BangBang77]

I like and wear Roundhouse bibs, in both denim and cotton duck.

They are made in the USA.

They're all I wear when I'm not at work. Been wearing them since I was a kid. I will be buried in a starched set of denim bibs and a white shirt.