WANTED New or clean used OEM 350 crank case/oil tank

[Kensie1988]

I have a husky 350 project I'm trying to bring back and I'm going to need a new oil tank/crank case and then a piston, but I can get that later. Looking for either new or used, but must be OEM

 

[cus_deluxe]

I have one, fairly clean as i recall. Ill dig it out when i get home.

 

[jacob j.]

Did yours burn a hole in the oil tank? That's pretty common and I have two like that.

 

[Kensie1988]

Yep, that's how I got it, I wonder what causes it to do that.

 

[Kensie1988]

I have one, fairly clean as i recall. Ill dig it out when i get home.

Awesome, thanks!

 

[Kensie1988]

So is it the mufflers working loose that causes this?

 

[jacob j.]

So is it the mufflers working loose that causes this?

Yep. Later there was a brace designed to help keep the muffler on. Lots of early 350s ended up with a hole in the tank.

 

[Kensie1988]

Yep. Later there was a brace designed to help keep the muffler on. Lots of early 350s ended up with a hole in the tank.

Can I attach this brace? I found I will also be needing an OEM piston and cylinder, or a really good alternative, I really enjoy bringing saws back to life and really hope I can rebuild this thing. I'm wanting it to be my truck Saw.

 

[cus_deluxe]

If ur needin a top end, a 346ne top end can be had for $125 or so brand new these days...

 

[lehman live edge slab]

I have a husky 345 for parts, runs real well but looks like it bounced around the back of the truck for a couple years. I thought that the 345/350 were pretty much the same saw minus the smaller displacement. Or take the throttle levers and hand gaurd off your 350 and use the 345 as is.