MS460 with 660 top end

[Deets066]

It will fit on there, just gunna have a huge squish if it ain't machined. 066 cylinder with the Chinese big bore 46 piston

 

[Deets066]

Won't run fur chit without a lot of work. And even then it's questionable

 

[Deets066]

2 piece

 

[paragonbuilder]

I thought you could use an 064 piston in a 460? Wrist pins are different?


Sent from my iPhone using Tapatalk

 

[dall]

same size dan but the wrist pin to crown is taller on the 064

 

[paragonbuilder]

same size dan but the wrist pin to crown is taller on the 064

So same should be true of 066 piston Dallas?


Sent from my iPhone using Tapatalk

 

[dall]

i would think so dan

 

[Lightning Performance]

To answer Scott. Drill or reamout the rod lol. Just cut the rod off and add a peice. You can always use an off-set wleded bushing in the 660 piston, right? Remember meth or crank + dremel + what did Dave say, oh yea no *f-wordin common sense but it will run just not very long

we need pics

No really, did you get this saw from A Supa Genius with Acme pills???

 

[Deets066]

I thought you could use an 064 piston in a 460? Wrist pins are different?


Sent from my iPhone using Tapatalk

All 12 mm

 

[paragonbuilder]

wrist pin don't fit. need to make a stroker crank with a 660 rod. how much you want to spend?

All 12 mm

Scott why do you say the wrist pin won't fit?


Sent from my iPhone using Tapatalk

 

[dall]

maybe the width between ?

 

[Deets066]

Scott why do you say the wrist pin won't fit?


Sent from my iPhone using Tapatalk

You would need spacers on a 66 piston or nothing on the 46 bb piston.

Not much faith in the bb piston though

 

[Jughead]

yeap.this is definately a 54mm 066 cylinder.hope to get pictures tomorrow.haven't had much of a chance to study it.i know that it could possibly be 046 cases since its non flippy cap.definately has a 460 tank.cylinder is marked 1122 no Mahle,ks or gilardoni markings that i see.

keep in mind i bought 2 other saws with it soooooooo dude coulda got wild "as usual" and untelling what hes done.but the saws do look like they had some dummy dust ran through them too.

 

[drf256]

Good stuff.

 

[Jughead]

Here we go first round of pictures

 

[Jughead]

 

[Jughead]

poly flywheel.also got another 046 with a poly fw and red choke lever.no top end though.

 

[mdavlee]

Good pile of parts. If you decide you don't need any of it let me know. I've got a 046 to put together

 

[Jughead]

will do mike.not sure what i will do right now.just bought everything as a potential project right now for this winter.was kind of curious as to what the dude done.
squish measurements shortly

 

[Jughead]

looking for some .250 solder does anyone have any?