HELP! Ms441c Reset Trouble

[ManiacalMark]

I believe what I did is the correct reset procedure. But, towards the end I never heard it clean up and run smooth, and now it idles higher like it’s not getting enough fuel.

Just got the saw not long ago so I’m not sure, guessing it needs a solenoid and filter.

 

[Maintenance Chief]

Depending on the year they came out with a warranty coil and carb.
Check your linkage from the carb to the strato butterfly, they can hang open slightly and throw the whole works out of tune.

 

[bigbadbob]

Depending on the year they came out with a warranty coil and carb.
Check your linkage from the carb to the strato butterfly, they can hang open slightly and throw the whole works out of tune.

yup and hard to figure out!! BTDT

 

[hacskaroly]

I believe there are two different reset methods, and it depends on what year the saw is as to which one you use.

 

[ManiacalMark]

Well it’s a 2012 model I was told so I’m not sure what range of resets and such I should do.

I’ll check the linkages