SOLD Ms241c

[jk14]

Ms241c 9/17 build date. Saw has been used and has some scrapes and scratches. Runs as it should. Great little saws, currently my favorite model but I tend to grab my ported one. Will include a 14" 3/8P. .050 50dl. b&c. $320 plus actual shipping

 

[jk14]

Muffler was opened up as much as the stock deflector would allow and a wider weave screen was added.

 

[Sig226y]

Does the piston look good? If so i will take it but i am not set up on paypal f and f that i see everybody uses, could you give me until im off work to set it up and send it to ya? Is it set up with rim or spur sprocket.

 

[Gcdible1]

I am interested.


Sent from my iPhone using Tapatalk

 

[GCJenks204]

@Dustin4185

 

[jk14]

Does the piston look good? If so i will take it but i am not set up on paypal f and f that i see everybody uses, could you give me until im off work to set it up and send it to ya? Is it set up with rim or spur sprocket.

It is set up with a spur gear, but it shows very little wear. I'll pull the muffler and get some piston pics. tomorrow evening after work.

 

[Sig226y]

Thank you

 

[rjames]

Excellent cat to do bizniss with here gents.

 

[jk14]

Does the piston look good? If so i will take it but i am not set up on paypal f and f that i see everybody uses, could you give me until im off work to set it up and send it to ya? Is it set up with rim or spur sprocket.

I am interested.


Sent from my iPhone using Tapatalk

Ok just got home from work and pulled the muffler. Looks like there's some scuffing on the PTO side of the piston skirt

I'll adjust the price to $300 not sure if that'll help....

$280 PHO plus actual ship

 

[Sig226y]

Dang it probably run forever but with my luck who knows. Thank you for letting me know but i guess i better pass but i sure wish you luck selling it sir again thank you!