ms 462

[tree monkey]

Out of curiosity, how much run time are you putting on it between tearing it back down/making changes?

calibrate and test cut, maybe 3 min

What is this telling you?

i'm only looking to see if it is even side to side

 

[tree monkey]

yeah dude I didn't get the gig...totally forgot my hard hat!



so am I a perv if I see a naked chic with her legs spread?

AND it's on top of a piston.

btw my wife thinks I am going to hell. Maybe she's right...

yes, maybe, well..........

what did ne pussy lip sat to the other?












we used to be close until you let that dick um between us

 

[tree monkey]

I knew I liked that wash pattern when I saw it, I just couldn't get it off the tip of my tongue.

 

[EvilRoySlade]

Lookin good Scott. It’s going to get interesting when reinforcements show up. Hopefully this is brewing some ideas till then.

 

[T.Roller]

Will this saw be at Randy's gtg

 

[Redfin]

What are your thoughts on the transfer divider?

 

[tree monkey]

Will this saw be at Randy's gtg

if things work out, yes. but it may not be finished

 

[tree monkey]

What are your thoughts on the transfer divider?

in the case? or cylinder?

 

[T.Roller]

if things work out, yes. but it may not be finished

Sounds good

 

[Redfin]

in the case? or cylinder?

Case.

 

[tree monkey]

Case.

I don't think it was needed at all. but if it is removed it will increase case volume. the only thing it does is make the tr's longer. might improve the function of the Stratos. I don't care about those. btw, the Stratos open around 160 dur.

 

[huskyboy]

I don't think it was needed at all. but if it is removed it will increase case volume. the only thing it does is make the tr's longer. might improve the function of the Stratos. I don't care about those. btw, the Stratos open around 160 dur.

Do you play around with strato timing on strato saws or leave it alone?

 

[tree monkey]

Do you play around with strato timing on strato saws or leave it alone?

leave it alone, it's nothing more the a fresh air pump. takes fuel to make power.

 

[huskyboy]

I thought it was interesting the use of a electric version of a c3m zama. Wonder if a walbro hd12 could be fitted to make it non mtronic since they are similar?

 

[tree monkey]

cut base and squish on mikes 661

 

[Dub11]

View attachment 142926

cut base and squish on mikes 661

How far off is that 661 head from fitting on the 462?

 

[Redfin]

the only thing it does is make the tr's longer. might improve the function of the Stratos

So less likely any fresh strato charge making it to case.

 

[tree monkey]

How far off is that 661 head from fitting on the 462?

not something I would care to try.

 

[Redfin]

Been thinking about our convo at Kevins about these stratos Scott. Even after studying the port map on 261 I was assuming the fueled transfer charge always seperated the strato charge from the case. Id so like to see a flow map from the engineers on these strato saws.

 

[tree monkey]

i'm working on a cutaway strato cylinder and will be making a vid explaining how it works.