ms 462

[Redfin]

Durations make my head hurt.

Here's what I have for opening points.


Squish: .022”

Exhaust: 101°

Mains: 123°

Secondaries: 120°

Intake: 82°

That's using a ring in the bore.....not trying to shine a light to "see" when they open.

I like those better. Shall we blame Julie Ann for distracting Scotty timing his?

 

[Mastermind]

I like those better. Shall we blame Julie Ann for distracting Scotty timing his?

Let ten guys check timing numbers, get ten different results.

 

[Redfin]

Let ten guys check timing numbers, get ten different results.

Its still easier to blame BlueBalz.

 

[Mastermind]

Its still easier to blame BlueBalz.

He's helping me out with some chain. So....

 

[Redfin]

He a biggy boy.

 

[Mastermind]

He a biggy boy.

And stuff

 

[Deets066]

Durations make my head hurt.

Here's what I have for opening points.


Squish: .022”

Exhaust: 101°

Mains: 123°

Secondaries: 120°

Intake: 82°

That's using a ring in the bore.....not trying to shine a light to "see" when they open.

Well chit..... looks like a helleva a place to start

 

[tree monkey]

 

[tree monkey]

He a biggy boy.

can I have some? whatever it is your smoking, can I have some? please

 

[Deets066]

Still moving forward?

 

[tree monkey]

yep

 

[Deets066]

yep

How much gain from each trans change?
I’m too lazy to time muhself

 

[tree monkey]

42.9 with stock piston
42.6 with piston changing secondary's, had a lose in torque
42.4 with piston changing primary's , good torque

 

[tree monkey]

piston changes dur by about 3 deg

 

[TreeLife]

can I have some? whatever it is your smoking, can I have some? please

The devils lettuce is legal for recreational use in my state lol

 

[deye223]

scott you went back to full comp .............. or was that semi skip just for the sharpening demo

 

[tree monkey]

almost all are testing is done with full comp, that's what was handy for the video

 

[Redfin]

can I have some? whatever it is your smoking, can I have some? please

Im still workin on your last riddle. I may need more.

 

[Brewz]

Durations make my head hurt.

Here's what I have for opening points.


Squish: .022”

Exhaust: 101°

Mains: 123°

Secondaries: 120°

Intake: 82°

That's using a ring in the bore.....not trying to shine a light to "see" when they open.

So they are opening the secondaries first?

 

[Brewz]

Im getting the feeling that there are not huge gains in these things compared to older models once modified.
To be honest, what I see in the last vid looks bloody good for a 70cc work saw.

Cant wait to get mine and give it a run before pulling it apart for some mods