McCulloch vacuum pressure block off plates.

[YoungSawman05]

Hey fellow Mac enthusiasts!

Was wondering if there is anywhere to buy/ idea to make a block off plate for the exhaust and carb to get a vacuum pressure tests similar to my Stihl tools that block off the intake and exhaust. I have read a few things in the Mac threads about people making them. Was wondering if anyone sells them / guidance on making one. For a PM850, PM700 and PM 10-10s that I want to keep running forever. I also just like to collect tools I might use once a year

 

[Squareground3691]

Some 1/8 rubber sheet material and aluminum plate 1/8-1/4 thick with holes to match the intake and exhaust pattern and sum screws to match , fairly easy,

 

[PA Dan]

I work in a steel mill. I cut a bunch of plates and just drill the holes for the muffler bolts. Bicycle inner tube rubber works well.

 

[Sloughfoot]

Been a minute since I did that on an old McCulloch but I believe I did it like you can on most modern saws. Make holes in a piece of 1/8 rubber . and bolt the muffler/carb down over it.

 

[Stump Shot]

I bought a set from eBay some time ago, not sure if they are still available.

 

[Squareground3691]

Patiently waiting, View attachment 488608

 

[heimannm]

@cinci5

Check with member cinci5 here on OPE. He was making and selling them on eBay but does not have them listed currently.

Alternative is to cut a solid "gasket" from rubber (inner tube, etc.) and use the muffler and carburetor to seal the openings.

Mark

 

[YoungSawman05]

@cinci5

Check with member cinci5 here on OPE. He was making and selling them on eBay but does not have them listed currently.

Alternative is to cut a solid "gasket" from rubber (inner tube, etc.) and use the muffler and carburetor to seal the openings.

Mark

Thanks!

 

[fossil]

I just use a piece of inner tube and use the muffler and carb to block them off.

 

[Bill G]

Somehow this winter I ran a bolt in a rear tractor tire. I had the on-farm tire service guy out to put a boot in it and a new tube. The new tube was $89. As he was cleaning up he was going to put the old tube in the service truck. I laughed and said "I have have a use for that"...... and tossed it on the nearby trailer. Lots of material there.

 

[cinci5]

Thanks!

What are you looking for ? Came in late on this.

 

[cinci5]

I bought a set from eBay some time ago, not sure if they are still available.

Yep my set. Thanks.

 

[cinci5]