McCulloch vacuum pressure block off plates.

[YoungSawman05]

Hey fellow Mac enthusiasts!

Was wondering if there is anywhere to buy/ idea to make a block off plate for the exhaust and carb to get a vacuum pressure tests similar to my Stihl tools that block off the intake and exhaust. I have read a few things in the Mac threads about people making them. Was wondering if anyone sells them / guidance on making one. For a PM850, PM700 and PM 10-10s that I want to keep running forever. I also just like to collect tools I might use once a year

 

[Squareground3691]

Some 1/8 rubber sheet material and aluminum plate 1/8-1/4 thick with holes to match the intake and exhaust pattern and sum screws to match , fairly easy,

 

[PA Dan]

I work in a steel mill. I cut a bunch of plates and just drill the holes for the muffler bolts. Bicycle inner tube rubber works well.

 

[Sloughfoot]

Been a minute since I did that on an old McCulloch but I believe I did it like you can on most modern saws. Make holes in a piece of 1/8 rubber . and bolt the muffler/carb down over it.

 

[Stump Shot]

I bought a set from eBay some time ago, not sure if they are still available.

 

[Squareground3691]

Patiently waiting,