Mastermind Meets The MS660

[Deets066]

Think it revs a little more than a 660 ?

I believe that if your runnin less than a 32" on a 660 then you could be up around 14,000

 

[Mastermind]

Think it revs a little more than a 660 ?

It's tuned to 13,800......and four stroking heavily. It would go much higher.

 

[jmssaws]

The play saws I build tune around 14200,that's fast but that's where they tune. The Christmas saw tuned at 14000 and turned 11000 with a 36" buried.

That saw is holding very good rpm in the wood and that's all this *s-word is about. Great job randy.

 

[junkman]

I need to try that tach out mopar sent me see where my saws are at

 

[Deets066]

I need to try that tach out mopar sent me see where my saws are at

Hard line?

 

[junkman]

It's tuned to 13,800......and four stroking heavily. It would go much higher.

Does the 660 seem to have a deeper tone to you ? or they pretty close ?

 

[junkman]

Hard line?

think it says fast tach ? does that sound right ? its kind you just set on the saw and it reads somehow

 

[Mastermind]

Does the 660 seem to have a deeper tone to you ? or they pretty close ?

Yeah.......I noticed that too. This saw is higher pitched.

The exhaust is higher.......reckon that's why?

 

[jmssaws]

Yeah.......I noticed that too. This saw is higher pitched.

The exhaust is higher.......reckon that's why?

It sounds like the exhaust is higher.

 

[jmssaws]

This is 14000 and still plenty fat.

 

[Redfin]

They all have the same whine noise to me? Always wondered what that is.

 

[jmssaws]

Flywheel makes that whine

 

[Brush Ape]

You know I'll be tasting more jalapeno bean dip now Jason. Thanks for sharting your undies.

You're just letting us know in... (Ready for it) advance. See what I did there. I'm trying to get banned, can you tell?

Let Daddy show you how.

 

[rburg]

Looked like you were cutting doughnuts instead of cookies with those logs. Looks like you were cutting them quickly as well.

 

[Mastermind]

I dropped that tree just to make those videos. Corey asked for a video......and he ain't even here. My heart is broked.

 

[Ladrhog]

I'm here. just drooling.

 

[junkman]

Yeah.......I noticed that too. This saw is higher pitched.

The exhaust is higher.......reckon that's why?

In our atv engines the bigger bore had a lot to do with sound and tourque ,should be similar in a saw ? Going from 250cc to a 310 or 330 cc could tell a lot of exhaust tone difference

 

[Mastermind]

I'm here. just drooling.

Does it seem a little better?

 

[Ladrhog]

Oh hell yeah. By far the strongest saw I own. Only problem is you've ruined me on stock saws.
Guess I better starts building a saw piss fund.

 

[Mastermind]

Oh hell yeah. By far the strongest saw I own. Only problem is you've ruined me on stock saws.
Guess I better starts building a saw piss fund.

What saw would you do next if you had plenty of funds?