Update for the races:
There will be 3 classes available for each cc size. Definitions of the classes may be subject to further refinement, but are listed below:
BONE STOCK - defined as NO performance enhancements - this is designed to make it fun for locals and beginners as well
WOODS PORTED - if you've got a cut squish, decked cylinder, altered port timing, muffler modification, or thinned carb shaft, you'll be in this class.
RACE SAW - if you have a 2 piece head, the saw runs on something other than gas/2stroke, you have a non-original carb/intake, or run an expansion pipe, you'll be in this class.
VINTAGE - your saw was manufactured prior to chain brakes
As in previous years, there will be plaques presented to the Stock and mod class winners. Adding the race saw class is new this year - we did not request trophy plaques for it yet - sorry, maybe next year, we'll see how it goes. We'll be running in the following size classes:
35 & under (by recent request, but no trophy available)
36-45 cc
46-55 cc
56-65 cc
66-75 cc
76-86 cc
over 86 cc
Vintage
There are often groups of saws such as Zips that will group and run in classes for fun. All are welcome!
We'll be bringing race cants of various sizes. Your cut area will be measured and marked at 5" so we can get the most out of the wood. If we can, we'll grab an extra round or two to play with.
Looking forward to seeing you all there!
Also - we'll be leaving our house via caravan of Dodges around 145 for a 2pm-ish arrival at the fairgrounds