Ideas for porting an 036 Pro

[jmssaws]

Why aren't you running them?

How do you blow through a pleated filter with your mouth?

I do run them when I put a cover on.

You put your mouth on it and blow. Lol

 

[jmssaws]

Put it up to it and see if you can blow through a HD 2. Then try those. World of difference.

Most hd2's I've seen are about stopped up even though they look clean.

You seen the difference standing in my shop mike, they flow a giant amount more.

 

[mdavlee]

Most hd2's I've seen are about stopped up even though they look clean.

You seen the difference standing in my shop mike, they flow a giant amount more.

Yep. Next order I'll be grabbing some.

 

[jmssaws]

I like the way a saw runs with a maxflow on it but I like the look of a saw better with the covers on and these white filters run as good as the maxflow.

 

[jmssaws]

I'm at 104 124 76 on my 034,no fingers or bridges and I'm happy how it runs.

Although it's barely faster than Mikes 346 I ported. Damn little husky is fast

 

[huskihl]

I ended up taking about .012" more off the base and squish to get more blowdown. Filled the bridges and the intake with epoxy. Ended up at E 104°, transfers at 123°, and intake at 76°. Phone battery went dead so no pics. I'll get a video this week

 

[smokey7]

Will epoxy stay in a bridge port? I figured rt wouldn't work well there.

 

[huskihl]

Will epoxy stay in a bridge port? I figured rt wouldn't work well there.

We'll find out. My 026 will whip the 036's ass. If it's a turd, I'd never use it anyway

 

[huskihl]

Got a chance to run the saw today. The chain is pretty aggressive. I had the rakers set to about .035" for round chain before I converted it to square.

I filled the bridge ports and intake. Much more torque now. Before, if I dogged in, it would bog easier. I'm happy with it now.

 

[drf256]

Looks Damn good Kevin.

Bravo!

 

[lwhaples]

Much better.

 

[jmssaws]

Sounds sporty,good job!

 

[jmssaws]

Here's my regular 034 that's almost Excactly the same numbers as you got.