I did it!

[Farmchuck]

We need a Husky AT section.

Agreed!

 

[Farmchuck]

Woodcuttersgaragellc.com I think that is 04Ultras' website. 18" .325 .050 85 dollars shipped!

Thanks!

 

[Farmchuck]

I can't really comment until I run it this weekend. It will be about 40°F

Any news on the saw from this past weekend Steve?

 

[exCanuck]

After many years I finally pulled the trigger and purchased a 550xp.

http://blog.hlsproparts.com/2016/09/complete-guide-to-husqvarna-550xp.html

 

[Steve]

Any news on the saw from this past weekend Steve?

No. It was icing or raining all weekend. Friday is supposed to be near 60 so I'll report back then. Hopefully it runs as it should!

 

[Tor R]

We need a Husky AT section.

defently, we're gone more then once

 

[Mastermind]

If you start a 550XP - 562XP thread, I can get Steve @exCanuck to make a section in the tech area for it. Then we can move other AT related threads to that section.

 

[Steve]

If you start a 550XP - 562XP thread, I can get Steve @exCanuck to make a section in the tech area for it. Then we can move other AT related threads to that section.

Sounds great! Thank you.

 

[exCanuck]

If you start a 550XP - 562XP thread, I can get Steve @exCanuck to make a section in the tech area for it. Then we can move other AT related threads to that section.

If you are sure that it isn't just a THREAD within Technical, then a SubForum inside of Technical can be added. In fact, it just was added. Let me know if it really only needs to be a THREAD.

 

[Spike60]

We need a Husky AT section.

Yeah, I'd like to do that. Weimedog will come down here this weekend if the weather is good, and we plan to do a video on AT. That would be a good way to kick off the thread and it would likely answer many of the questions that are commonly asked. We'll log in to the mother ship and do some downloads, firmware updates. Explain difference between fuel setting and master resets. Some of the carb updates. Would be enlightening to anyone who's never seen it done. Shoot down some of the witchcraft superstitions too.

 

[Mastermind]

Yeah, I'd like to do that. Weimedog will come down here this weekend if the weather is good, and we plan to do a video on AT. That would be a good way to kick off the thread and it would likely answer many of the questions that are commonly asked. We'll log in to the mother ship and do some downloads, firmware updates. Explain difference between fuel setting and master resets. Some of the carb updates. Would be enlightening to anyone who's never seen it done. Shoot down some of the witchcraft superstitions too.

I started a couple of threads in the new section. One for the 550, and another one for the 562.

 

[Spike60]

I started a couple of threads in the new section. One for the 550, and another one for the 562.

Cool. When we do the vid we'll drop a link in one of them.

 

[beaglebriar]

Yeah, I'd like to do that. Weimedog will come down here this weekend if the weather is good, and we plan to do a video on AT. That would be a good way to kick off the thread and it would likely answer many of the questions that are commonly asked. We'll log in to the mother ship and do some downloads, firmware updates. Explain difference between fuel setting and master resets. Some of the carb updates. Would be enlightening to anyone who's never seen it done. Shoot down some of the witchcraft superstitions too.

Looking forward to the video Bob.

 

[Mastermind]

Here's a link to that section.

http://opeforum.com/forums/husqvarna-autotune-saws.110/

If anyone wants a thread moved there, just let me know.

 

[Tor R]

Yeah, I'd like to do that. Weimedog will come down here this weekend if the weather is good, and we plan to do a video on AT. That would be a good way to kick off the thread and it would likely answer many of the questions that are commonly asked. We'll log in to the mother ship and do some downloads, firmware updates. Explain difference between fuel setting and master resets. Some of the carb updates. Would be enlightening to anyone who's never seen it done. Shoot down some of the witchcraft superstitions too.

thats cool Bob.
I'm already looking forward to see your video.

 

[Farmchuck]

Yeah, I'd like to do that. Weimedog will come down here this weekend if the weather is good, and we plan to do a video on AT. That would be a good way to kick off the thread and it would likely answer many of the questions that are commonly asked. We'll log in to the mother ship and do some downloads, firmware updates. Explain difference between fuel setting and master resets. Some of the carb updates. Would be enlightening to anyone who's never seen it done. Shoot down some of the witchcraft superstitions too.

Getting together Saturday or Sunday?

 

[Steve]

Any news on the saw from this past weekend Steve?

I took the 550 out today. It was around 55°F. It ran much better. It only hesitated if I let it idle for longer than 20 seconds or so.

 

[Farmchuck]

I took the 550 out today. It was around 55°F. It ran much better. It only hesitated if I let it idle for longer than 20 seconds or so. View attachment 50922

Interesting. Did you like the way it cut?

 

[Steve]

Interesting. Did you like the way it cut?

Yes. It cuts very fast. Sometimes I lean on it a little too hard and forget that it is only 50cc!

 

[Farmchuck]

Yes. It cuts very fast. Sometimes I lean on it a little too hard and forget that it is only 50cc!

Glad you enjoyed it. I haven't gotten out with mine since it was bogging a few weeks ago in the cold weather ( screwed my stupid back up) but I'm anxious to see if the bog is gone now that it's warmer here. How many tanks you think you've run through it?