Hybrid clonesaw 365 with a 390 topend - aka the "86'r from youtube"

[Jake Dykstra]

I see the stroke is the same, are the pin's the same diameter?

Should be 12mm on both is my understanding.

 

[HumBurner]

That would be worth the work!

I'd love to try that out on some trees.

 

[Jake Dykstra]

I'd love to try that out on some trees.

It will be faster for sure. Hopefully by guys like upstate doi g these builds the big 3 will start looking at lightweight big cc options in the future