Husqvarna 450 vs 62cc clone saws

[Welderman85]

Dumb question sorry. I have a husky 450 and never really been. Impressed by it. I ran my buddies joncutter 5800 and it seem to scream compared to the 450. Both running 18" bars one .325 and on 3/8. I was thinking of ordering the wemars 62cc saw a d selling the husky. Is that a bad move

 

[SawAddictedFarmer]

I'd stay away from cheap clones. If you want to sell your husky I'd get a husky 562 or Stihl 362 and a 20" bar. How much does your saw get used? What size wood?

 

[ammoaddict]

Dumb question sorry. I have a husky 450 and never really been. Impressed by it. I ran my buddies joncutter 5800 and it seem to scream compared to the 450. Both running 18" bars one .325 and on 3/8. I was thinking of ordering the wemars 62cc saw a d selling the husky. Is that a bad move

You could do a muffler mod on your 450 and retune the carb. It will wake it up a bit.

 

[Stem]

what @ammoaddict said. I drilled a couple 3/16" or 1/4" in the front of muffler on mine. once I got it tuned, it really woke up & started a whole lot easier when hot.

 

[Jusgunn3]

I used to have one and it’s a handy little saw but now I have 350’s with muffler mods and base gasket deletes. They run much better than the 450.

 

[Czed]

Dumb question sorry. I have a husky 450 and never really been. Impressed by it. I ran my buddies joncutter 5800 and it seem to scream compared to the 450. Both running 18" bars one .325 and on 3/8. I was thinking of ordering the wemars 62cc saw a d selling the husky. Is that a bad move

Those zenoah clones not the wemars just the generic one's
were like 55.00 shipped a couple year's ago so I bought a 58cc and 62cc they were both 58cc
Actually after removing the base gasket and simple porting and muffler mods
They ran with a 455 rancher a 257 Husqvarna and a Stihl 290 I had here
I gave them to my brother he uses them all the time for firewood.
Apparently the wemars are kinda like the premium zenoah clones?
There's a bunch of YouTube vids about them.