Husky 51 saw build project

[paragonbuilder]

The permatex sealant has a 4 hr cure time before use. That's obviously worst case. It had 2-3 hrs before starting.
And I've never had a problem with it with less time. It's so thick and gooey that it's not going anywhere.

 

[RI Chevy]

Lol. Too funny. I trust you. [emoji106]
I personally would wait 24 hours, but that's just me. I am a conservative. [emoji2]

 

[malk315]

Nice. I learn something every day.

I learned a LOT at Dan's yesterday. Such a great day.

@huskboy tell your dad I feel like a tool for forgetting to offer to give him some $$$ for that chain tensioner bolt retainer he picked up at the shop yesterday. I'm sure it was only like a dollar but it's not my style to not offer to cover! I actually had one of those that I got from Bob but didn't reailize what it was in the box of parts... I thought it was a random piece of plastic. Anyway tell your dad thanks for grabbing that one part!

 

[malk315]

What's that?
Don't let Dan anywhere near your saws cuz he doesn't follow directions? [emoji23]

You kiddin? That saw went together like clockwork yesterday.
Thanks again Dan for letting me come to your shop and get that thing put together.

Tom the owner is all excited to get the saw back and have at it. Be really curious to see how it compares to the 350 he's been running.

 

[Motorhead]

I like motoseal, A couple hours and let it rip.

 

[Stackowood]

Nice work!

 

[Mattyo]

Its a boy!

nice job guys...

when did you do the gtg?... dan told me last saturday was cancelled due to snow?

 

[paragonbuilder]

I like motoseal, A couple hours and let it rip.

This is good stuff, but it's not great when you are testing and taking the jug on and off. I'm going to get some anaerobic sealer for the future. No wait time on that stuff and it cleans up easy.

 

[paragonbuilder]

Its a boy!

nice job guys...

when did you do the gtg?... dan told me last saturday was cancelled due to snow?

It was yesterday. I thought you said Saturday's were out for a while cuz your wife does taxes and you had to watch kids?

 

[Mattyo]

I still waiting 24 hours .... I use loctite 515 or 518 on the base gasket, just enough to wet it.... and wet both surfaces, cylinder and case.... barely wet ... put together and let sit for a super patient 24 hours.....

 

[Mattyo]

I did have kiddo duty yesterday ...

 

[paragonbuilder]

I still waiting 24 hours .... I use loctite 515 or 518 on the base gasket, just enough to wet it.... and wet both surfaces, cylinder and case.... barely wet ... put together and let sit for a super patient 24 hours.....

My saw time is limited, so I want to play immediately after messing with them.

 

[Mattyo]

too impatient Dan.... lol

 

[paragonbuilder]

too impatient Dan.... lol

[emoji41] I like to call it excitement
Usually I'm either running it right away, or 2-3 weeks later [emoji19]

 

[huskyboy]

I learned a LOT at Dan's yesterday. Such a great day.

@huskboy tell your dad I feel like a tool for forgetting to offer to give him some $$$ for that chain tensioner bolt retainer he picked up at the shop yesterday. I'm sure it was only like a dollar but it's not my style to not offer to cover! I actually had one of those that I got from Bob but didn't reailize what it was in the box of parts... I thought it was a random piece of plastic. Anyway tell your dad thanks for grabbing that one part!

He doesn't mind no worries ! And thanks guys for helping me figure out my 394 air leak. I learned brake clean is your best friend fixing saws

 

[paragonbuilder]

He doesn't mind no worries ! And thanks guys for helping me figure out my 394 air leak. I learned brake clean is your best friend fixing saws

I very rarely need to pressure vac test anymore. Way faster and easier. Of course if the saw isn't running, then I go old school...

 

[paragonbuilder]

Damn boys!

Looks like I need to get me some new test wood for the 660 build testing...

 

[paragonbuilder]

Here are a couple videos I took

 

[paragonbuilder]

I have one more video about 20 minutes long with my phone in my pocket, lots of Saw revving and talking... i'd post it but who knows what I said about anybody in it... [emoji33]

 

[paragonbuilder]

Mason's Dad, Darryl made this for me!