How to use and read timing degree wheel?

[idiotwithasaw]

That's a good idea

Sent from my HTC One using Tapatalk

 

[drf256]

After and Before TDC are the same in a 2-stroke btw. Took me a while to realize this.

Much less confusing once you get that theory.

Transfer flow is the most confusing to me. I'd be talking outa my arse if I tried to explain that.

 

[idiotwithasaw]

At least you get it, I'm gonna try my hand at this when my wheel comes in.

Sent from my HTC One using Tapatalk

 

[idiotwithasaw]

I appreciate everones input. Thank you. The wealth of knowledge here is priceless.

Sent from my HTC One using Tapatalk

 

[huskihl]

I didn't understand any of it til I did it. Like I said, use a 1/2" chuck off a drill, and print a degree wheel off.

 

[idiotwithasaw]

I should have a couple blown drills laying around I can steal the chuck off of.

Sent from my HTC One using Tapatalk

 

[huskihl]

I should have a couple blown drills laying around I can steal the chuck off of.

Sent from my HTC One using Tapatalk

If you've never done it, open the chuck all the way. There's a screw inside. I believe it's LH thread. The chuck then removes opposite thread

 

[idiotwithasaw]

Thanks, be done it before, but I appreciate you posting how to.

Sent from my HTC One using Tapatalk

 

[czar800]

I use my flywheel puller to hold my wheel just get a longer bolt and washers and nut.

 

[idiotwithasaw]

Another good idea.

Sent from my HTC One using Tapatalk

 

[Mattyo]

nice idea....

i have a vid in the making

 

[MustangMike]

I like that, and I got a puller!

 

[idiotwithasaw]

I would be tempted to use a wing nut, to make adjustments easier.

Sent from my HTC One using Tapatalk

 

[Mattyo]

video is up

 

[idiotwithasaw]

Thanks Matt, when I get some time I'll watch it.

Sent from my HTC One using Tapatalk

 

[idiotwithasaw]

I hope there's no combustion going on I'm the bottom end. Lololol.

Sent from my HTC One using Tapatalk

 

[idiotwithasaw]

Than again though, actually answered a lot of my questions.

Sent from my HTC One using Tapatalk

 

[Mattyo]

i am an idiot sometimes hehe

 

[idiotwithasaw]

Good to know I'm not alone.

Sent from my HTC One using Tapatalk

 

[czar800]

i am an idiot sometimes hehe

Doing better then me me! My wife says that I'm a idiot all the time!