MG porting
Pinnacle OPE Member
Not sure what's going on with OPE forum but ones again it's telling me that it's not safe to be on here right now!!!! Uuggg.
Will do. Not sure what's going on with the ope forum but ones again it's telling me that it's not safe to be on here right now!!!! Uuggg.Keep us posted.
There's supposed to be a small square-sided o ring on the pump output. Might be missingI’m gonna pull the oiler apart and have a look. Something is definitely not right. Without the oiler on the oil hose oozes so I’m guessing it’s not plugged that end. Cheers for the thread. I’ll post back some results.
Still a round o ring, but with square edgesBtw is currently 36” bar on a mill. So I need it pumping as much as possible.
It's actually called a square ring. But to save confusion I called it a square o ring.It is not really an O ring, if you used one you used the wrong rubber part. It is a short piece of tubing. That could easily be the problem.