EFCO / OLYMPYK/ OLEO MAC

[lehman live edge slab]

Just an idea but if you can find a seal with the right if for the crank but smaller than what you need for the case someone could turn you a press fit spacer to make up the difference. And if you want a coil I will send you one

 

[lehman live edge slab]

What was the biggest Efco made a few years ago? One of my neighbors has one think it was around 80cc. The saw needs work but someone told him no parts available for it. Thinking I can get it cheap

 

[lehman live edge slab]

I believe it’s an 8200 efco

 

[countryhog]

Just an idea but if you can find a seal with the right if for the crank but smaller than what you need for the case someone could turn you a press fit spacer to make up the difference. And if you want a coil I will send you one

Located a supplier and bought some seals
Btw, might be interested in that 8200 if you opt out

 

[lehman live edge slab]

Good deal

 

[hank jensen]

Morning fellas, I have a customer looking for a electronic coil for a 251 super Olympic, any ideas on interchanges or finding one? Thanks!

Try https://www.lawnmowerpros.com/ They are an efco dealer and have all the parts lists online for the earlier Oleomacs/Olympyks. if they cant get it I have a number of used saws/parts but really would rather not sell stuff. Ive quite a collection of Oleo`s and always looking for more

 

[FergusonTO35]

Still feeling the pull towards the Italian saws, not really sure why. I like the looks of the Efco MT6500, which is 62 cc and made in Italy. There is an NIB powerhead on Fleabay for $450.00 right now. A 60-70cc saw is really the only thing missing from my battery, and I like the looks of this model.

Can't buy anything 'til the dog gets better but it's fun to look.

 

[countryhog]

What was the biggest Efco made a few years ago? One of my neighbors has one think it was around 80cc. The saw needs work but someone told him no parts available for it. Thinking I can get it cheap

Did you ever buy this saw? What model is it?

 

[lehman live edge slab]

Nope but he’s bringing it over in December to have me look at fixing it

 

[countryhog]

Nope but he’s bringing it over in December to have me look at fixing it

Curious. Got a 284

 

[lehman live edge slab]

Pretty sure this is the newest 80cc they had and discontinued. 8200 series I think

 

[WKEND LUMBERJAK]

Picked this up today which Olympic is this? I'm quessing 28? Or 480

 

[countryhog]

That a cutoff saw?

 

[WKEND LUMBERJAK]

That a cutoff saw?

Yes

 

[countryhog]

Guessing that’s a plug in front of the starter where bar oil goes on a saw. Eh?
Btw, good score. What’s displacement? Does it run? Need more pix

 

[WKEND LUMBERJAK]

The bore is a fuss over 52mm 80cc had it running ,changed fuel line cleaned carb, took all the covers off to clean up . Putting back together, heavy old son of gun.

 

[jacob j.]

The bore is a fuss over 52mm 80cc had it running ,changed fuel line cleaned carb, took all the covers off to clean up . Putting back together, heavy old son of gun.

I think it's a Diamant Super 80, made by Emak/Efco, which made cut-off saws out of many other brands of chainsaw motors. They were converted by Target I think.

 

[WKEND LUMBERJAK]

It is seems to be in good shape.

 

[Dream]

These any good?
Guy says its brand new. Just been sitting.
What would be a fair offer?

 

[LouCi4er]

They are really good saws,its a little on the heavy side but they are really reliable.Like most of the efco products,they are a litle heavier,a little slower but a lot more reliable than the others plus they are fairly priced.