Dolmar 64xx/73xx/79xx series, smurfs and solo 665/675/681 thread

[Wilhelm]

Read Dan's signature, maybe he has exactly what You need, and then some!

 

[dahmer]

Read Dan's signature, maybe he has exactly what You need, and then some!

Notice that “need” was in quotation marks.

 

[PA Dan]

Notice that “need” was in quotation marks.

I did see that![emoji6]

 

[Wilhelm]

Notice that “need” was in quotation marks.

I don't know about You, but I end up buying every saw I "need" even though I don't need it at all.
That been said, to me "needing" a saw has the same end result as needing a saw.

I was trying to be eco friendly in my reply to You and saved the quotations for when they are needed!

So, does Dan have the saw You "need"?

 

[dahmer]

So, does Dan have the saw You "need"?

Afraid to look.

 

[Wilhelm]

Just do like this

 

[dahmer]

Just do like this

If I look like that then I better grow an eye in the back of my head, if the wife knows I bought another saw. At least the last 2 were the same smurf color, they all look the same to her.

 

[old_sir_henry]

At least the last 2 were the same smurf color, they all look the same to her.

the advantage of sticking with the same brand ...

 

[dahmer]

Just picked up a NOS smurf Makita 7301. It has the smaller inner felling dog but no outer dog. The paint in the tapped holes has never been disturbed so it came with no outer dog. Is a smaller matching outer dog available? I can’t seem to find one listed on the parts diagrams I’ve been able to find. Thanks

 

[PA Dan]

Just picked up a NOS smurf Makita 7301. It has the smaller inner felling dog but no outer dog. The paint in the tapped holes has never been disturbed so it came with no outer dog. Is a smaller matching outer dog available? I can’t seem to find one listed on the parts diagrams I’ve been able to find. Thanks

Where the heck did you pick that up at?

 

[dahmer]

johnmn got it from Dan in Greece and never ran it.

 

[Rob Stafari]

To get that matching small dog you will have to speak to one of our helpful EU members like @Wilhelm. I'm pretty sure he has access to them still.

 

[Wilhelm]

To get that matching small dog you will have to speak to one of our helpful EU members like @Wilhelm. I'm pretty sure he has access to them still.

I replied to Mark's other post.
I can get them in volume from Germany, no problem.
But since Mark only needs a single outer spike I believe I have a new spare one in my parts bucket.
I just got home from work, I'll check after lunch and PM Mark.
No obligation whatsoever, if Mark has another source no hard feelings from my side at all.
Shipping a single spike will be close to the cost of the spike itself though.

I'll PM Mark a little later with details, then he can decide what to do.

Dan and Andrew are also certainly able to get the spike and they are top notch to deal with.

 

[huskyboy]

7301 wore out it’s first bar logging. No idea how much wood I cut with it... but a lot. Take my word for it. Saw still looks great. Holding up and performing well. It’s my main winter saw with those nice heated handles. Which work well by the way. They don’t put out much heat when the saw is idling, but make several good cuts and they get nice and warm. This is because the generator puts out more electricity with more rpms.

 

[Wilhelm]

I missed using my big gal, there wasn't much call for her, well that changed

 

[huskihl]

I missed using my big gal, there wasn't much call for her, well that changed

View attachment 212368 View attachment 212369

Looks like 5100 wood


Just sayin’

 

[mettee]

I need a 5100

 

[mettee]

I want this one

 

[PA Dan]

View attachment 212413

I want this one

Well buy it.... please!

 

[mettee]

They want too much, you know that