DL count. 7900 w 28" tsumura

[Stevetheboatguy]

Friend of mine asked me what dl a 28" bar for his 7900 would be. I answered 93 and a possible 8t rim when it's streched. Now I'm second guessing myself.

On my oregon bar I run a 93dl do the tsumura run the same or one link shorter?

Steven

 

[brox]

I run 92dl on a 7 pin

 

[huskihl]

92 if it’s a d009 bar

 

[Stevetheboatguy]

Appreciate it guys. Thanks.



Steven

 

[SOS Ridgerider]

The guys are right on 92dl. I have a D009 bar that calls for 93dl, but on the 7900 I have to run 92, which happens to fit just fine on my Husky too. I believe the new D009 Tsumura bars say 92dl now.

 

[huskihl]

The guys are right on 92dl. I have a D009 bar that calls for 93dl, but on the 7900 I have to run 92, which happens to fit just fine on my Husky too. I believe the new D009 Tsumura bars say 92dl now.

On my Cannon lightweight, 91 works for all 3 lol. Not sure how they did that

 

[SOS Ridgerider]

On my Cannon lightweight, 91 works for all 3 lol. Not sure how they did that

I’ll be damned!! Lol

 

[dahmer]

I run 93 dl with a Husky 28” and 8p.

 

[Wilhelm]

On my Cannon lightweight, 91 works for all 3 lol. Not sure how they did that

Shorter tail?!

 

[huskihl]

Shorter tail?!

Not certain. It’s a combo mount for Stihl or Husky (with adapter). Stihl slot width with Husky slot length. And I believe the adjuster hole is drilled a little larger than normal

 

[Sagebrush33]

On my Cannon lightweight,

Those are pricey ...... and look like jewelry too.
Are they worth it? My 7910 is beggin for a 32. Anyone else carry these besides Baileys? They are outa stock and none do till early Aug.

 

[huskihl]

Those are pricey ...... and look like jewelry too.
Are they worth it? My 7910 is beggin for a 32. Anyone else carry these besides Baileys? They are outa stock and none do till early Aug.

I like it. It’s the first longer bar I’ve run that I thought was worth it for cutting smaller stuff without bending over.
Definitive Dave is the resident US Cannon supplier. I believe they’re back ordered like you say.

 

[Old Grouchy]

My 7900 came new with a 28" Dolmar branded Oregon bar that took 92 DL. I wasn't happy about it either as a regular Oregon branded Doo9 bar is 93DL.

I laid the Dolmar 28" bar on top a Oregon Doo9 bar and you could see the Dolmar branded bar was just a bit shorter.