Dedicated 28" bar powerhead poll
- Thread starter TreeLife
- Start date
Rob Stafari
Pinnacle OPE Member
- Local time
- 5:22 PM
- User ID
- 860
- Joined
- Feb 11, 2016
- Messages
- 881
- Reaction score
- 3,854
- Location
- Cincinnasti
DOLKITA FOR THE WIN!
Of course two are fresh off the workbench and only one shown with a bar is a 24, but the 28 is set to go to the one on the left.
Of course two are fresh off the workbench and only one shown with a bar is a 24, but the 28 is set to go to the one on the left.
cgraham1
Here For The Long Haul!
- Local time
- 2:22 PM
- User ID
- 257
- Joined
- Dec 26, 2015
- Messages
- 4,625
- Reaction score
- 19,554
- Location
- Nor Cal
A 7900/7910/Solo is wasted if it doesn’t have a 28” bar. A good 60cc can pull a 24”, and it will be a lot lighter. I also like a 440/046 hybrid, but my 7900 was much stronger than my hybrid. Both were ported by the same guy...
- Local time
- 5:22 PM
- User ID
- 570
- Joined
- Jan 17, 2016
- Messages
- 8,002
- Reaction score
- 51,236
7910 FTW
MustangMike
Mastermind Approved!
- Local time
- 5:22 PM
- User ID
- 338
- Joined
- Dec 30, 2015
- Messages
- 11,524
- Reaction score
- 36,361
- Location
- Brewster, NY
IMO, a well ported 460, 461 or 7900/7910 will all be very similar in power and weight, the rest will go down to personal preference.
I really like my MOFO ported 460, it is a very strong saw. But, there are times I appreciate the lighter weight of the CFB hybrid, and performance is pretty close.
I really like my MOFO ported 460, it is a very strong saw. But, there are times I appreciate the lighter weight of the CFB hybrid, and performance is pretty close.
whitesnake
Pinnacle OPE Member
Dolkita!
Rob Stafari
Pinnacle OPE Member
- Local time
- 5:22 PM
- User ID
- 860
- Joined
- Feb 11, 2016
- Messages
- 881
- Reaction score
- 3,854
- Location
- Cincinnasti
They run on high test saki mixed with premium bourbon barrel aged soy sauce 40 to 1.
Time's Standing Stihl
Below me...
- Local time
- 5:22 PM
- User ID
- 1179
- Joined
- Apr 20, 2016
- Messages
- 11,248
- Reaction score
- 64,402
- Location
- Central Iowa
Handles pretty good. Prefer felling with a shorter bar
Lightning Performance
Here For The Long Haul!
- Local time
- 5:22 PM
- User ID
- 677
- Joined
- Jan 26, 2016
- Messages
- 10,991
- Reaction score
- 28,058
- Location
- East of Philly
The 180 needs a better chain Jim.
Truth be told most 660's around here never wore over a 28" bar.
Mine never did at work even on big stuff. Never used light bars either. Production saw, never imho. The 79xx would just better fit the whole bill or a Solo.
Truth be told most 660's around here never wore over a 28" bar.
Mine never did at work even on big stuff. Never used light bars either. Production saw, never imho. The 79xx would just better fit the whole bill or a Solo.
