Chainsaws and Lifelong Friendships Raffle Draw Date June 24th 8PM EDT.

[DSS]

That is all the connective tissues, chicken cocks, eyeballs, and various stuff they dropped on the floor, ground up, seasoned, cooked in a big ass vat, then sold to hungry people who can't afford real food since the fat cats hoarded all the money and piled it up in off shore accounts.

Clear enough?

So pretty much like Taco Bell then

Plus your chickens got cocks in Tennessee? Y'all must got some confused roosters

 

[USMC615]

Time to chit or get off the pot here... @GCJenks204 , @Mastermind , add this to the drawing list. Drill Doctor 750X drill bit sharpener. Folks can zoom in on the pics and see what it’ll do spec-wise. Once you get it dialed in, a little trial and error to begin with, it’s one one helluva bit sharpener, variable btwn 115-140 degs. For the folks who go through drill bits of various styles...it’s a solid sharpener...it’ll handle all 3/32” to 3/4” drill bits, regardless of type. To hell with throwing drill bits out and spending $3 to $5 to $20 bucks on replacements, depending on bit material/make and size. Pretty damn neat machine fellas...you’ll like it, trust me!

 

[Czed]

Time to chit or get off the pot here... @GCJenks204 , @Mastermind , add this to the drawing list. Drill Doctor 750X drill bit sharpener. Folks can zoom in on the pics and see what it’ll do spec-wise. Once you get it dialed in, a little trial and error to begin with, it’s one one helluva bit sharpener, variable btwn 115-140 degs. For the folks who go through drill bits of various styles...it’s a solid sharpener...it’ll handle all 3/32” to 3/4” drill bits, regardless of type. To hell with throwing drill bits out and spending $3 to $5 to $20 bucks on replacements, depending on bit material/make and size. Pretty damn neat machine fellas...you’ll like it, trust me!
View attachment 119555 View attachment 119556 View attachment 119557

Cool an infomercial
Nice gadget to have.

 

[Philbert]

. . . add this to the drawing list. Drill Doctor 750X drill bit sharpener.

I have an older version of that. Works really well, especially on smaller diameter drill bits that are hard to do evenly on a bench grinder.

Philbert

 

[GCJenks204]

Time to chit or get off the pot here... @GCJenks204 , @Mastermind , add this to the drawing list. Drill Doctor 750X drill bit sharpener. Folks can zoom in on the pics and see what it’ll do spec-wise. Once you get it dialed in, a little trial and error to begin with, it’s one one helluva bit sharpener, variable btwn 115-140 degs. For the folks who go through drill bits of various styles...it’s a solid sharpener...it’ll handle all 3/32” to 3/4” drill bits, regardless of type. To hell with throwing drill bits out and spending $3 to $5 to $20 bucks on replacements, depending on bit material/make and size. Pretty damn neat machine fellas...you’ll like it, trust me!
View attachment 119555 View attachment 119556 View attachment 119557

Thanks Jason.

I have updated the list. So far 31 prizes and of that 17 of them are complete saws!!!!

I may just need to get myself some entries in this one!!!

 

[USMC615]

Thanks Jason.

I have updated the list. So far 31 prizes and of that 17 of them are complete saws!!!!

I may just need to get myself some entries in this one!!!

We gonna do this thing...I’ve got a saw coming up!

 

[USMC615]

I have an older version of that. Works really well, especially on smaller diameter drill bits that are hard to do evenly on a bench grinder.

Philbert

Funny...you were the first person I thought of when I posted the Drill Doctor 750X...

 

[USMC615]

Next up...the most sought after saw on the planet...a cherry MS-211! Yep...read em’ and weep fellas. It leaks a little bar oil through the bottom end, but somebody can handle that no doubt...

...Be the perfect saw for an up and coming young man or young lady to get their feet wet...cranks on the first/second pull, oils, runs like it should. Pretty zippy little saw for no more than what it is with LP on it!


@GCJenks204 , @Mastermind ...add this please...

 

[Philbert]

...add this please...

Come with that, . . . er. . . .'stand' that it is displayed on?

Philbert

 

[USMC615]

Come with that, . . . er. . . .'stand' that it is displayed on?

Philbert

I probably should sell it...just don’t use it like it’s meant to be used. I wanted the baddest thing I could get under $4K...I’ve got about $3200 tied up in this cherry Super Split HD...and I’ve split tons of wood on it. One thing’s for certain...it doesn’t discriminate, gnarly, notted, straight grain is a gimmee...it busts everything you can put on it. It’s a bad ass machine!

 

[Wilhelm]

Time to chit or get off the pot here... @GCJenks204 , @Mastermind , add this to the drawing list. Drill Doctor 750X drill bit sharpener. Folks can zoom in on the pics and see what it’ll do spec-wise. Once you get it dialed in, a little trial and error to begin with, it’s one one helluva bit sharpener, variable btwn 115-140 degs. For the folks who go through drill bits of various styles...it’s a solid sharpener...it’ll handle all 3/32” to 3/4” drill bits, regardless of type. To hell with throwing drill bits out and spending $3 to $5 to $20 bucks on replacements, depending on bit material/make and size. Pretty damn neat machine fellas...you’ll like it, trust me!
View attachment 119555 View attachment 119556 View attachment 119557

I have an older version of that. Works really well, especially on smaller diameter drill bits that are hard to do evenly on a bench grinder.

Philbert

The smallest I can sharpen fairly accurately eyeballed freehand is 1.5mm, but doc says that I'm legally blind whenever I'm getting my annual health checkup done.

I can grind an extremely aggressive drill bit, but I can give it a smooth finish if desired.

I was always interested to see how such a grinder shapes the drill bits cutters.
I'm fully sold on a cross cut grind - it's kinda like a square grind on a chain.

 

[Mastermind]

You mfers are making me proud. Well, except for @DSS , he's hung up on chicken dicks......and that's disturbing as hell.

 

[Stump Shot]

You mfers are making me proud. Well, except for @DSS , he's hung up on chicken dicks......and that's disturbing as hell.

He probably never even had Rooster Fries either then.

 

[Mastermind]

He probably never even had Rooster Fries either then.

Sounds de-lish....

 

[jacob j.]

You mfers are making me proud. Well, except for @DSS , he's hung up on chicken dicks......and that's disturbing as hell.

Everyone has to have a hobby.

 

[Mastermind]

Everyone has to have a hobby.

I don't usually judge......but DAMN.

 

[DSS]

Everyone has to have a hobby.

Thanks for your support, JJ.

I don't know about the rest of these fat bastards

 

[Mastermind]

Thanks for your support, JJ.

I don't know about the rest of these fat bastards

I'm not fat anymore. I lost weight. Take it back.

 

[Stump Shot]

Sounds de-lish....

Not bad, if ya don't think about it overly too much. LOL

 

[Mastermind]

Not bad, if ya don't think about it overly too much. LOL

Like mountain oysters......real good, till you realize you're eating the nuts right offa some poor critter.