Carb Jet Question

[TheDarkLordChinChin]

This might be a bit of a silly question but which jet screw ought to be longer?

I took the carb apart and didn't notice the two screws were different lengths until I was putting them back in.

Warlboro carb in a 262.

 

[Shane¹]

This might be a bit of a silly question but which jet screw ought to be longer?

I took the carb apart and didn't notice the two screws were different lengths until I was putting them back in.

Warlboro carb in a 262.

From my experience usually the low screw is longer and is skinny at the end

 

[TheDarkLordChinChin]

From my experience usually the low screw is longer and is skinny at the end

Thanks, that was my initial suspicion.

 

[huskihl]

Usually they have different thread diameters. If not, when correctly installed the ends will be relatively flush when turned in all the way