any more pigs of the guinea variety out there?

[fearofpavement]

I can probably do the Husky 55 piston. I need to know the diameter though as there are some variation in the cylinders. I'm not sure I have a "55" closed port vs a "51". If you send me a size I can go measure up some cylinders.

 

[junkman]

I cant seem to find the "smack user: junkman" toggle switch on my command console
Dave

I bet you would love to have the first 461 ever sold in the pac nw and also the first one that MM ported ,not that there is a cherry one with that description sitting in my shop covered in dust .

 

[Definitive Dave]

Yes Dave while you're waiting we are having a keggar a 1/4 mile from here and bunch of college girls with big knockers grilling t-bones a 1/4 mile from there free of charge and downhill to both gigs. You can even ride my sister's new Schwinn.

I'm not sure I still have the energy to make my way through a 1/4 mile of college girls with beautiful luscious knockers and I think the bike might get in the way. Not as young as I used to be. The downhill sounds nice I admit.
Can you give me more details on the cooking skills of the babes and the general comportment of the kegger-corps? Oh hell what color is the Schwinn, and does it have a banana seat and chopper scoop handlebars?

 

[Definitive Dave]

I can probably do the Husky 55 piston. I need to know the diameter though as there are some variation in the cylinders. I'm not sure I have a "55" closed port vs a "51". If you send me a size I can go measure up some cylinders.

46mm my friend, just let me know

 

[Definitive Dave]

I bet you would love to have the first 461 ever sold in the pac nw and also the first one that MM ported ,not that there is a cherry one with that description sitting in my shop covered in dust .

how is this for a broken brainwave - I like a nice saw but I don't want a mint one unless I am sure already that I don't want to use it, if it is too nice my hoarding OCD will just put it on the shelf and it will never see wood
still....cheaper and more fun than therapy

but I would oogle the hell out of some pics








dust, for shame.....for...........shame

 

[Brush Ape]

I'm not sure I still have the energy to make my way through a 1/4 of college girls with beautiful luscious knockers and I think the bike might get in the way. Not as young as I used to be. The downhill sounds nice I admit.
Can you give me more details on the cooking skills of the babes and the general comportment of the kegger-corps? Oh hell what color is the Schwinn, and does it have a banana seat and chopper scoop handlebars?

I don't know what a comportment is but if yer asking if the beer is cold then yes. Don't worry about the boobs, most of the guys don't make it to the right foot after three porterhouse and the left foot rub.

 

[Onan18]

Dave is the 288 filter the low top (same as late 61/66/266SE/XP/early 268XP)? If so then I'm your huckleberry.

Joe

 

[fearofpavement]

46mm my friend, just let me know

Hmm, 46mm is what the regular 55 cylinder is. I was thinking the closed port was smaller. This is a windowed piston?

 

[Definitive Dave]

I don't know what a comportment is but if yer asking if the beer is cold then yes. Don't worry about the boobs, most of the guys don't make it to the right foot after three porterhouse and the left foot rub.

comportment is the demeanor and carriage of a person or group the overall tone of the party as it were, these days I prefer a more sedate gathering than in my younger years
still like boobs though

 

[dall]

i put new fuel line on a 55 and in blue numbers it said 46 on it also

 

[Definitive Dave]

Hmm, 46mm is what the regular 55 cylinder is. I was thinking the closed port was smaller. This is a windowed piston?

no windows from what I remember, not enough husky knowledge in my brain to even identify the color orange most days

Dave is the 288 filter the low top (same as late 61/66/266SE/XP/early 268XP)? If so then I'm your huckleberry.Joe

I have to look and probably post a picture, I know a picture of a hightop when I see it but not familiar with the filters at all, I will post one in the morning

thanks
Dave

 

[Onan18]

Low Top



High Top

Joe

 

[Brush Ape]

these days I prefer a more sedate gathering

lol

 

[Toad22t]

Here is a high top cover and high top filter for a 181/281/288! This is the KnN filter option for it. I have an oem filter if you want me to post that Dave.

 

[Toad22t]

View attachment 10014

Low Top

View attachment 10015

High Top

Joe

Nevermind Onan beat me to it!

 

[Definitive Dave]

View attachment 10014

Low Top

View attachment 10015

High Top

Joe

low top
thanks
Dave

 

[stihl_head1982]

I've had good luck with China bearings.

Can you list the saws you've purchased them for, or just send me a PM. I'm interested in knowing the saws -- thanks!

 

[jmssaws]

Can you list the saws you've purchased them for, or just send me a PM. I'm interested in knowing the saws -- thanks!

066/660 is all I've used them in.

 

[Onan18]

Dave like I said I can most certainly use a low top.

Thanks,
Joe

 

[Definitive Dave]

its yours