Any Chinese chainsaw and chinese parts discussion

[Czed]

Can all your saws just muscle through the chain brake? Mine will still turn like 6-8k rpm on the chain brake. Even just from a stop, I haven't tried engaging it while wfo.

No they are iffy some trip too easy
Some are spot on.
But they do work
I did disconnect one
I'm getting oem parts for.

 

[Leafy]

I must need oem parts mine is really difficult to engage. I'm thinking the issue is the band.

 

[T.Roller]

View attachment 128881 Swapping china rings starter rope and rubber line's.
I'm done with any of those parts
In my saw's
Many saw's i can gently lol catch the starter with
A hemostat
Just takes seconds to swap ropes.
View attachment 128876 View attachment 128878 View attachment 128879 View attachment 128880

I thought about ordering some of that rope. You like it?

 

[Czed]

I thought about ordering some of that rope. You like it?

I did they all have true blue now.
That was when i took the china rope off
Other guy's have no problem with it.

 

[Czed]

I thought about ordering some of that rope. You like it?

I bought 3 rolls lol
Steve uses it too
We like it.

 

[Czed]

I must need oem parts mine is really difficult to engage. I'm thinking the issue is the band.

The one i disconnected would trip at idle
I couldn't find a way to adjust it.
I run old saw's without brakes
But i like having them.

 

[Czed]

Got a friends 99 371 in today.
Handle crushed and the throttle cable was bad.
Not in terrible shape just run hard.
Someone butchered the muffler.
The exhaust cut through the top
Cover and chainbrake.
Replacing everything with huztl
Except a meteor piston
He wants.
The clones are identical to these of course.

 

[Leafy]

Well now its doing this. WTF. I'm still trying to figure out 2 stroke symptoms and fixes.

 

[Czed]

Well now its doing this. WTF. I'm still trying to figure out 2 stroke symptoms and fixes.

One of my bad coils did that
Hate to tell you lol

 

[Leafy]

God dammit.

 

[Czed]

God dammit.

Do know anyone you can try another coil?
You have had the most trouble i know
Of.

 

[Leafy]

Luckily I was within the amazon return limit so I already printed my return label.

 

[Czed]

Might find a used one
Advertise in the classifieds here
I did.

 

[Leafy]

I'll give china 1 more try then buy a new OEM one.

 

[Czed]

Well now its doing this. WTF. I'm still trying to figure out 2 stroke symptoms and fixes.

@Tor R
What's your diagnosis

 

[Bigmac]

I'll give china 1 more try then buy a new OEM one.

You have had a lot of bad luck on yours, be patient, you will get it all working!! I had some issues with mine, but after some port work I am starting to like it more, need to cut some wood with mine!

 

[Tor R]

@Tor R
What's your diagnosis

don't know how much he has done with his clone already Dave, but, carb, coil, coil distance, coil wire, impulse hose, etc etc.
As long she hold preasure&vacuum it should be possible to find the issue.

 

[Czed]

don't know how much he has done with his clone already Dave, but, carb, coil, coil distance, coil wire, impulse hose, etc etc.
As long she hold preasure&vacuum it should be possible to find the issue.

He's been thoroughly through it
What it's doing now
Is exactly what mine did
When my am coil failed.
I can't tell for sure though

 

[Stump Shot]

A neon tester should show if the coil has issues, otherwise check for fuel starvation, like a kinked or cracked line, impulse too.

 

[Leafy]

Wasnt the coil. It was a crank case leak. But the tester didnt find it. I slightly stripped one of the cylinder bolts when I put it back in the last time I guess. I helicoiled it, replaced the china gasket with an OEM one I got on clearance and honda bonded it last night. Tonight it runs great. I'll put it in wood this weekend hopefully. I also square filed the upstart chain.