Any 3120 fans?

[Normzilla]

Nice, that's impressive

 

[davidwyby]

@Normzilla first time I was impressed with euc, haha. Course I was still getting the hang of sharpening for it.

 

[Normzilla]

@Normzilla first time I was impressed with euc, haha. Course I was still getting the hang of sharpening for it.

It's tough wood. But for that saw to keep chugging like that. It's impressive cause we know how hard Euc is

 

[davidwyby]

I guess a stock 3120 chugs…ported and adjustable H they rip.

 

[KS Plainsman]

Holy smokes, is that stuff always that dusty, or is it extremely old, or what? I'm not familiar with eucalyptus at all, but that looked dustier than rotting, nasty, decades old cottonwood.

Saw looked great though!

 

[davidwyby]

It’s been down in a desert for 20 years

 

[KS Plainsman]

It’s been down in a desert for 20 years

That makes sense. Lol

 

[David Young]

Looks like it's in good shape, at least on the outside. Nice.

thanks its very low hour but it looks like it had some sun fading. I think my first mod is an unlimited coil.

 

[jacob j.]

thanks its very low hour but it looks like it had some sun fading. I think my first mod is an unlimited coil.

I think my first mod would be a few trips to the gym

 

[KS Plainsman]

thanks its very low hour but it looks like it had some sun fading. I think my first mod is an unlimited coil.

The pull start is blocking it in the pictures, but does your have the adjustable H jet? I have no idea when they started doing that.

After an unlimited coil and Huskihl's H jet mod, my saw is a completely different saw. It also has a muff mod, but that coil and being able to adjust it woke that sucker up more I think.

 

[Normzilla]

I'm going to get pictures up, and post mine for sale or trade tommorow. It's immaculate and bone stock. Would trade for a nice 394 or 395. Doing what I'm do8ng this 3120 is too heavy for me.

 

[justoldsaws]

Size comparison, here's my 3120 beside my Husky 440.
These things are big.

 

[Normzilla]

Yes they are monsters

 

[KingCobra98]

How does the 3120xp compare to the echo cs1201 I see on here for sale once in a while?

 

[Normzilla]

How does the 3120xp compare to the echo cs1201 I see on here for sale once in a while?

I don't know much about that echo. But it looks similar in size and weight, to a 3120. Big and heavy. Lots of torque

 

[KingCobra98]

I don't know much about that echo. But it looks similar in size and weight, to a 3120. Big and heavy. Lots of torque

You really don't see any comparisons between the two. If I had the money I would lol.

 

[Squareground3691]

I don't know much about that echo. But it looks similar in size and weight, to a 3120. Big and heavy. Lots of torque

Echo cs1201 probably @Lee H could chime in on the comparison

 

[bulletpruf]

My people are creamsicle people, but I have always lusted for a 3120...

 

[Lee H]

Echo cs1201 probably @Lee H could chime in on the comparison

I have never really compared saws side by side. All i can say is the 1201 is a sweet contender in the
big cube class. I have run one of mine at a few GTG's and it is a blast to run. No chain brake, no
emissions, and no noise factor meaning they bark. I run a 42 GB bar with full comp chain and it
pulls it with ease. @ 116cc's it is a touch smaller than it's competitors but i would guess stock for
stock it may come out on top and it still isn't broke it yet. It is also a very well built saw.

 

[davidwyby]

Those echos are super cool lookin.


You guys are gonna make me drag out my 3120 in the heat and cut just for fun…