85cc 064 porting

[jmssaws]

I turned it up some

 

[CR500]

On the edge? Or not quite?

Good work tune be13.5 or 14k

14.5 for against my neighbors 390 lol

Sent from my non internal combustion device.

 

[jmssaws]

It's fine there and 4 stroking good.
It's actually closer to 15 than 14.5

For work 14 to 14.3 is safe.

Video the 390 race please

 

[CR500]

I will try my best.... He thinks he is top dog of the road here with that saw. 390xp with a 20'' bar.

It is stock and cuts well stock, the 441 before round 2 with brad was only .5 behind it, he had a new chain and I had a somewhat dull work chain. Was cutting a lot of ash that day so he won sort of.

Has no idea about ported saws so I figure it should be in good fun lol

so 15k for the race then lol

 

[jmssaws]

It won't be a race.
It would shame the 064 to be ran against such a lesser saw.

Please video it

 

[RI Chevy]

Lol. Tell him your using rocket fuel. All in the fuel.

 

[Chris Zautner]

Yes please video it. But don't let him hear the saw before the race because he will probably pack up and go home.

 

[RI Chevy]

He'll punt on 4th down.
Just tell him his saw runs real good for a Husqvarna.

 

[Deets066]

I will try my best.... He thinks he is top dog of the road here with that saw. 390xp with a 20'' bar.

It is stock and cuts well stock, the 441 before round 2 with brad was only .5 behind it, he had a new chain and I had a somewhat dull work chain. Was cutting a lot of ash that day so he won sort of.

Has no idea about ported saws so I figure it should be in good fun lol

so 15k for the race then lol

And then tell him that his 390 is a bigger saw than a 64, so he should give you a head start

 

[CR500]

Have some maple and a new cherry light wo it will be fun lol

Sent from my non internal combustion device.

 

[Definitive Dave]

And then tell him that his 390 is a bigger saw than a 64, so he should give you a head start

326 Bigger!!

 

[CR500]

So since this is a technical thread, lets talk about exhaust outlet size.

Saw has a slightly bigger stock outlet and did not like a DP cover.

This is strange territory Jason.

Funny how some saws really do not like a heavy flowing exhaust when ported

Sent from my non internal combustion device.

 

[awol]

A good 390 may beat that 064. This ones over half wore out, the bar is is 30", 8 pin in petrified White Oak with a logger filed full comp chain.

 

[Definitive Dave]

064 FTW 32:1 Nuff Said

feel free to carry on your silly discussion of what chainsaw might be worthy to cup the sac of the 064

 

[CR500]

Plan on running nothing less than 32:1 lol

Not sure what it will drink when it gets back but I'm sure orginal or Benol will protect at those rpms

 

[Definitive Dave]

Damn I love a good runnin' 064

 

[Deets066]

064 FTW 32:1 Nuff Said

feel free to carry on your silly discussion of what chainsaw might be worthy to cup the sac of the 064

Well put

 

[Deets066]

FAckin huskies

 

[mdavlee]

A good 390 may beat that 064. This ones over half wore out, the bar is is 30", 8 pin in petrified White Oak with a logger filed full comp chain.

I thought your boy was fixing to shoot something there for a minute LOL

 

[Keith Gandy]

A good 390 may beat that 064. This ones over half wore out, the bar is is 30", 8 pin in petrified White Oak with a logger filed full comp chain.

Dang good runnin saw there!!