661 R&D

[CR500]

any word on a m-tronic 066?

 

[jmssaws]

I didn't get a chance to look at it but I will.

 

[jmssaws]

Back on this today.
Anybody got something they want tested?

 

[RI Chevy]

Just curious Jason. Do you go through the calibration/learning function with the Mtronic when you switch saws, it does it just remember?
You hear all these stories of how they lean out and toast the motors. Did you do anything to make it fat?

 

[jmssaws]

I've never reset one,my buddy is a big shot at stihl and told me to only reset as a last resort.
I have never had one that needed reset.
They learn how you like to run it and reseting it starts everything over.

 

[RI Chevy]

Ok. But don't they want you to go through a calibration if you use the saw in a different location or elevation. Put it through the learning process. Not sure if I am even using the right terminology. I've never heard an Mtronic run that fat. It must really like the port job. Lol

 

[jmssaws]

In the video the saw was cold,it takes it a little bit to warm up.

It is tuned well,I can't get a standard carb to beat it so it's doing a great job.

 

[RI Chevy]

Cool. I am really surprised.

Does it lean out a little after it warms up?

 

[Redfin]

Where are you at on primary angle with this one J?

 

[mdavlee]

I left/lost my phone at work for the guys that normally text me. Bedtime now so hopefully it is in the trailer when I get there.

 

[Redfin]

I left/lost my phone at work for the guys that normally text me. Bedtime now so hopefully it is in the trailer when I get there.

Bad week for phones Mike.

 

[Miller Mod Saws]

Back on this today.
Anybody got something they want tested?

I would like to hear it run with long bar rs or lgx chain in some hard wood. If ya have time.

Got a piece of 36" hedge down there my man. Lmao. Just jacking with ya.

 

[Time's Standing Stihl]

In the video the saw was cold,it takes it a little bit to warm up.

That's one thing I've noticed about mine is how cold blooded it is. First cut if it's not warmed up to "operating" temps it's a bit sluggish. When it's ready, it's like the 4 barrel opened up. ...hold on baby!

Sent from my SM-G900R4 using Tapatalk

 

[jmssaws]

I would like to hear it run with long bar rs or lgx chain in some hard wood. If ya have time.

Got a piece of 36" hedge down there my man. Lmao. Just jacking with ya.

I'll try to do that today

 

[leadfarmer]

Man I almost thought this thread was dead. How you makin out Jas ?

 

[jmssaws]

Man I almost thought this thread was dead. How you makin out Jas ?

Good just been busy on other saws.
Trying to finish the other cylinder now

 

[Time's Standing Stihl]

Good just been busy on other saws.
Trying to finish the other cylinder now

Slacker

 

[Stihl working Hard]

661 flywheel work on a 660 crank?
ill find out in a minute
661 has a big crank end like a 660 but im not sure if you have to have 2 magnets or what.
I think a mtronic flat top would be the ultimate saw.

I would love to see a Mtronic flat top if doing it is possible

 

[leadfarmer]

Good just been busy on other saws.
Trying to finish the other cylinder now

Just didn't see anything in awhile an there is no hurry on my part. Grind away

 

[jmssaws]

Just didn't see anything in awhile an there is no hurry on my part. Grind away

I didn't have a phone for 3 days.
I lost your number so text me