357XP: First Time Porting

[Stump Shot]

Do my timing numbers seem like I read them correct?

Looking through my notes the exhaust seems a bit much, otherwise the intake and transfers are spot on. Doesn't mean anything other than I would double check my triple check on the snaust.

 

[P.M.P.]

Leave the squish alone that pitting only helps everybody knows that...

 

[cuinrearview]

Sub'd

 

[David Young]

I was going to offer to mail it out east to an idiot with a lathe...
but if you can find one closer have atit
offer is there though...

you seem a touch low as SS said on the exhaust.

If you post the linear measurements from the squish to port open I can double check them for you.

 

[Kiwioilboiler]

Completely unrelated @redline4 but your Skynyrd name sake was a fantastic guitarist!

 

[redline4]

Thanks guys. I was hoping I was at least getting the gist of it with the degree wheel.


That tornado intake has got to be worth 6hp, no?


@Kiwioilboiler you can't go wrong with a little Skynyrd from time to time!

 

[Stump Shot]

Leave the squish alone that pitting only helps everybody knows that...

Pitting make more exhaust, more exhaust makes more compression, more compression makes more squish......duh.

 

[Stump Shot]

I was going to offer to mail it out east to an idiot with a lathe...
but if you can find one closer have atit
offer is there though...

you seem a touch low as SS said on the exhaust.

If you post the linear measurements from the squish to port open I can double check them for you.

Good offer, only thing is when he comes by me in person, I can let some of my idiocy rub off on him, you just can't get that in the mail. Lol

 

[David Young]

yup hands on idiocy is the best everyone knows that.

 

[Kiwioilboiler]

@Kiwioilboiler you can't go wrong with a little Skynyrd from time to time!

yeah!!! Lucky enough to see what's left of the band down here a couple of years ago. Dream achieved.