353/346xp oil tank vent

[Pete031]

I’ve been working on bringing this 2010 353 back to life and ordered the small aluminum check valve for the oil tank shown in the parts diagram. Part number and part are correct for the 350 I just did but the 353 appears to have a brass screen and possibly a duckbill behind it. My experience finding these? Also looking for the oil feed hose from the pump to the bar, so far it’s back ordered. Any favorite sources?

 

[Woodslasher]

I’ve been working on bringing this 2010 353 back to life and ordered the small aluminum check valve for the oil tank shown in the parts diagram. Part number and part are correct for the 350 I just did but the 353 appears to have a brass screen and possibly a duckbill behind it. My experience finding these? Also looking for the oil feed hose from the pump to the bar, so far it’s back ordered. Any favorite sources?

353 is a mag cased saw, 350 is a plastic-cased clamshell unit so I'm not surprised that the vents are different.

 

[Pete031]

It shows the same vent in the 353 parts diagram, it must be wrong. Any good online parts catalogs?

 

[Woodslasher]

It shows the same vent in the 353 parts diagram, it must be wrong. Any good online parts catalogs?

I use jacks small engines usually.

 

[Pete031]

Yeah they have a much better diagram and show the brass screen and duckbill valve. Thanks!