24" 404 bar available?

[jmssaws]

I'm looking for a lite weight tsumara/ total or a sugi. Can't seem to locate one
Do they make one?

 

[CR500]

Guy on ebay out if Canada sells Tsumara bars in.063 all one has to do is swap a tip.

Also Stihl makes a 25ES light, I'm sure the tip swap should apply maybe?

Sent from my non internal combustion device.

 

[sawmikaze]

I bought a GB from left coast with some loops of skip to noodle with that 660 you did for me...works good.

 

[jmssaws]

I checked on left Coast but couldn't find one.
I also need a 3/8 tip for a gb cn40 and didn't see one of them either.

 

[CR888]

I run .325, 3/8 & .404 all in .063 and bought a 200pack of solid countersunk rivets. So bar tips get swapped around easy.

 

[Iron.and.bark]

I checked on left Coast but couldn't find one.
I also need a 3/8 tip for a gb cn40 and didn't see one of them either.

I have one new you could have for cost of shipping, but it's off an .058 bar (swapped to .325 when bought the bar).

Otherwise could get you one pretty easy, but it's Aussie prices, plus shipping

 

[jmssaws]

Is the cn40 a different tip from the other gb bars?

 

[junkman]

http://www.baileysonline.com/Chains...-Power-Match-Bar-84-Drive-Link-243RNDD009.axd throw a .404 tip on this ?

 

[jmssaws]

http://www.baileysonline.com/Chains...-Power-Match-Bar-84-Drive-Link-243RNDD009.axd throw a .404 tip on this ?

It has to be lw,I got stihl bars and new 404 tips but he wants a lw.

 

[junkman]

It has to be lw,I got stihl bars and new 404 tips but he wants a lw.

I think lw bars stop at 28 inches being shortest ,i may be wrong though .

 

[Jon1212]

I checked on left Coast but couldn't find one.
I also need a 3/8 tip for a gb cn40 and didn't see one of them either.

Call Gregg, and ask.....it's way easier than the internetz.

 

[Jon1212]

I think lw bars stop at 28 inches being shortest ,i may be wrong though .

Nope. They can be had in the wee little bars as well. The PSP's are really happy about this.

 

[junkman]

Nope. They can be had in the wee little bars as well. The PSP's are really happy about this.

Good info ,ty sir

 

[Jon1212]

Good info ,ty sir

Brian,

To be accurate, all the way down to a 14" 3/8lp are available in Sugi Hara LW. Though I would suspect they would be for use on a pole saw, but I'm sure many more are used for cookies, or display purposes.

 

[Jon1212]

It has to be lw,I got stihl bars and new 404 tips but he wants a lw.

Maybe contact @fordf150 (for Tsumura) or @04ultra (for Sugi Hara) options, and lead time?

 

[junkman]

Brian,

To be accurate, all the way down to a 14" 3/8lp are available in Sugi Hara LW. Though I would suspect they would be for use on a pole saw, but I'm sure many more are used for cookies, or display purposes.

I am just going by what my saw shop has on the wall more or less ,they try to stock most of the stihl, oregon and cannon models ,i have seen the short light bars like 14 inch ,i think carvers may use them ? but 20 and 24 they do not seem to have in stock in light .I have heard rumors of a stihl light bar coming out in 20 and 24 or 25 ,but have not seen any out yet .I have not researched the other brands though .

 

[fordf150]

cant get one from total super/tsumura in the states, not sure what the chainsawguy has available. lightweight tsumura's are only here in 050.

I also dont see Oregon RW bars in 24", they all start at 28"

 

[jmssaws]

cant get one from total super/tsumura in the states, not sure what the chainsawguy has available. lightweight tsumura's are only here in 050.

I also dont see Oregon RW bars in 24", they all start at 28"

What about a sugi?

 

[Jon1212]

cant get one from total super/tsumura in the states, not sure what the chainsawguy has available. lightweight tsumura's are only here in 050.

I also dont see Oregon RW bars in 24", they all start at 28"

That's lame. I wonder why they won't ship LW bars in .063 to the U.S......?

 

[fordf150]

What about a sugi?

I dont see anything listed in 404, or o63 in 24". they do have 24" 058 D009 but it is still 3/8 and no 404 tips available but may want to ask an actual dealer for sugi....may be something available i am not seeing on the price sheets i have

That's lame. I wonder why they won't ship LW bars in .063 to the U.S......?

i can probably order them.....50 at a time. Tilton doesnt see the demand for them so they arent importing them except when a dealer is willing to take a minimum qty of 50