PAST 2018 Upstate NY GTG - Sunday April 22nd

[Cobby08]

9010 is junk, you don’t want one

 

[Cobby08]

Do you have Chain for that 40”?

What’s the drive length?

I have a 123DL full comp on my 41", not sure if this is the same ideal as oregons 24"vs 25" stihl.

 

[Cobby08]

I threatened to burn my daughter’s pistol legged jeans: we aren’t Hog Farmers.

Da hell you got against hog farmers?

 

[MustangMike]

Jeff, I run .063 on my 24" and 28" bars, but for the 20" and 36" I run .050. Was not able to get the Stihl Light 36" bar in .063 in this area!

 

[Definitive Dave]

what kinda wood will be there for use on a cant stand?
I am trying to decide what chains and saws to bring along

 

[Definitive Dave]

You should reconsider.


I think you should bring some tooth picks...

decoys?

 

[Lightning Performance]

Do you have Chain for that 40”?

What’s the drive length?

RS full comp, new. It has been run on muh 660. Time to file it square.
GB roller tip 123dl

Edit: "404 40 is 117DL
3/8 on the 40 is 123DL

 

[Adirondackstihl]

what kinda wood will be there for use on a cant stand?
I am trying to decide what chains and saws to bring along

Just bring the Sawzall.
I don’t think we even discussed it.
Cobby had been bringing the cants, but I think the square wood fell through the cracks this year.
@Cobby08 ??

 

[RI Chevy]

Jeff, I run .063 on my 24" and 28" bars, but for the 20" and 36" I run .050. Was not able to get the Stihl Light 36" bar in .063 in this area!

Ahhh. Ok. Thanks Mike

 

[Lightning Performance]

Just bring the Sawzall.
I don’t think we even discussed it.
Cobby had been bringing the cants, but I think the square wood fell through the cracks this year.
@Cobby08 ??

Trust me, da wood don't have to be square. The CT big saw race went down in fat round red oak.

My 36" 050 is an old but good wide nose. 114dl standard tail.
I need some LP for it to mill with. Looks like Raisman LP chain will wrap it soon.

 

[Lightning Performance]

RS full comp, new. It has been run on muh 660. Time to file it square.
GB roller tip 123dl

The call number says the bar is 42 but it's called a GB40. With no dawgs, from the case to the cutter on the tip measures 41".

 

[Adirondackstihl]

@Definitive Dave once told me.......

“I have chains n saws i wont run in anything that aint soft n juicy”!

 

[Lightning Performance]

RS full comp, new. It has been run on muh 660. Time to file it square.
GB roller tip 123dl

Edit: 404 40 is 117DL
3/8 on the 40 is 123DL

Edit to DL count

 

[Lee H]

Just bring the Sawzall.
I don’t think we even discussed it.
Cobby had been bringing the cants, but I think the square wood fell through the cracks this year.
@Cobby08 ??

I was hoping for some big cants like 16 inch or bigger. Got a nice race chain to try.

 

[Lightning Performance]

I was hoping for some big cants like 16 inch or bigger. Got a nice race chain to try.

We can make one Lee.

 

[hseII]

I was hoping for some big cants like 16 inch or bigger. Got a nice race chain to try.

We can make one Lee.

Hopefully they’ve got some Big Wood.

 

[hseII]

We can make one Lee.

Maybe this guy can help.

 

[Lightning Performance]

Hopefully they’ve got some Big Wood.

Always nice wood in the Northeast.

There is a pile of poplar down the street given to me last year. Most cuts are six foot or less but fat. Twenty to twenty five inch rounds. Might be wet, might be dry, duno.

 

[Definitive Dave]

poplar 8x8 and 10x10 and 12x12 with a hand rubbed satin finish is what we are looking for
a ten footer of each would be perfect, If somebody finds em ill buy em, shoot me a pm
I wanna see Lee's chain run too, I'll try not to break anything this time

 

[hseII]

Always nice wood in the Northeast.

There is a pile of poplar down the street given to me last year. Most cuts are six foot or less but fat. Twenty to twenty five inch rounds. Might be wet, might be dry, duno.

https://youtu.be/WA6ML9_CgEg

https://youtu.be/W8csrILVHTM
https://youtu.be/qscY9sjDtUY

https://youtu.be/SismciqEJWY

I bet they’ve got it.