PAST 2018 Upstate NY GTG - Sunday April 22nd

[Wood Chopper]

One of my greatest joys at a GTG, other than meeting and talking with everyone, is getting to pull the trigger on a specific saw that I am interested in.

In that vein, I'm going to try to bring all my saws, but I may have to leave a few behind if space is tight in the Stang.

So, if you have any desire to run any of my saws, let me know, and I will make sure they do not get left behind. Here is what is currently running (they are all Stihl and all run square file chain):

026 Dr Al/MOFO ported 16" .325
261 Ver II MMWS 18" 3/8
360 Dr Al/MOFO
362 Ver I MMWS
MS 440 Unported, but modded
10 mm 044 Unported but modded
044/046 Hybrid ported by CFB
MS 460 w/046 D jug and bridge ports ported by Dr Al/MOFO
066 MMWS (for milling)
066 w/Cross P+C (featured on the HL Supply Website)
Asian Twin 660 (with Cross P+C)
King Kong - Asian 660 w/big bore (MS710) ported by Dr Al/MOFO

Thanks for letting me run the Dr. Al 460 last year. Just talked to the good Dr. about a 026 build. Definitely want to squeeze the trigger on that. Can't wait

 

[Adirondackstihl]

I’ll play along with Mike....
Since I’m having trouble deciding what to bring. I want to keep it to about 4-5 saws max.
I’ll put a star next to the ones I had planned.

PS9010 *
PS7900/7910 (MMWS) *
PS5100S
PS421
MS661 (MMWS)
044 10mm
08 (1963 original) *
McCulloch SP81 *
346 (ported & piped) *

 

[Mastermind]

I'm not bringing a damn thing.

 

[Adirondackstihl]

I'm not bringing a damn thing.

Thought about that too.

But hopefully you bring extree underwear and teethbrush

 

[Mastermind]

Thought about that too.

But hopefully you bring extree underwear and teethbrush

Allow me to recant......

I'm not bringing any saws, or saw related garb. AND.......I hope y'all keep the damn things quiet so I can enjoy shooting the breeze with my friends.

 

[Lightning Performance]

Bring the 362 ver 1. I'd like to see how it stacks up against my warmed over non-ported 362 version 1. @MustangMike

 

[Lightning Performance]

Allow me to recant......

I'm not bringing any saws, or saw related garb. AND.......I hope y'all keep the damn things quiet so I can enjoy shooting the breeze with my friends.

You would hate the CT GTG. All kinds of noise and smoke there. It was awful. Came home smelling like Sausage samiches, VP fuel and wood chips.
The Best yet!


Anyone have a space available for one more? Cash, trade, saw parts?...pm me

 

[Cobby08]

Hopefully I don't have to bring any...

MS 2-fiddy with MM
MS 362 type II Cobb'd up (potentially the Hangover saw 2.0)
MS 440 MMWS
MS 441 Cobb'd up
MS 461 Cobb'd up
MS 661 MMWS a.k.a. El Freako
MS 880 stockish
then the Oh-so-sessy, 0-fiddy-6 Mag II

 

[spencerpaving]

Allow me to recant......

I'm not bringing any saws, or saw related garb. AND.......I hope y'all keep the damn things quiet so I can enjoy shooting the breeze with my friends.

I leave habada home if you want quiet....

 

[MustangMike]

Jeremy, good to see you have a 10 mm again, even if you don't bring it (mine will be there).

I'm also pretty impressed with how my MS 660 Asian Twins run, considering they don't have any port work done to them other than installing the Cross/MMWS P+C sans base gasket with timing advance and muffler mod. I also centered the outside of the intake ports on both of them, as they did not come centered, but that was easily done with a hand file. IMO, for the money, they make a great large bar of milling saw. The only OEM parts I used on them were piston pin bearings and clips.

My 50 + +60 cc saws will definitely get to ride!

 

[MustangMike]

Mark, definitely El Freako, and the 2 70 cc saws.

When I had my adj carb 441 and my 044 (both completely stock at the time) I thought they were almost the same. How do you think they compare?

 

[Adirondackstihl]

Jeremy, good to see you have a 10 mm again, even if you don't bring it (mine will be there).

I'm also pretty impressed with how my MS 660 Asian Twins run, considering they don't have any port work done to them other than installing the Cross/MMWS P+C sans base gasket with timing advance and muffler mod. I also centered the outside of the intake ports on both of them, as they did not come centered, but that was easily done with a hand file. IMO, for the money, they make a great large bar of milling saw. The only OEM parts I used on them were piston pin bearings and clips.

My 50 + +60 cc saws will definitely get to ride!

I always had a 10mm

 

[MustangMike]

I ran the 710. Wowwie wow wow wow

I have not run it yet with the latest mods by Doc, but Dan will be bringing it up and I'll bring my long bar (36") for it. I'm anxiously looking forward to it!

 

[Wood Chopper]

Hopefully I don't have to bring any...

MS 2-fiddy with MM
MS 362 type II Cobb'd up (potentially the Hangover saw 2.0)
MS 440 MMWS
MS 441 Cobb'd up
MS 461 Cobb'd up
MS 661 MMWS a.k.a. El Freako
MS 880 stockish
then the Oh-so-sessy, 0-fiddy-6 Mag II

What dis pease? MS 2-fiddy with MM????

 

[Adirondackstihl]

What dis pease? MS 2-fiddy with MM????

Milk of Magnesia

 

[Cobby08]

Mark, definitely El Freako, and the 2 70 cc saws.

When I had my adj carb 441 and my 044 (both completely stock at the time) I thought they were almost the same. How do you think they compare?

Jeremy will want to punch me in the throat for saying this but I do like my 441. I think its such a smooth, refined saw its hard to not like other than its extra weight. Power wise the 440 has more I would say but that's due to a moob-job instead of my Cobb'd up work. It definitely is more of a high strung power band. As far as like a firewood saw that 441 (which is a CM) is much better to use as I don't use nearly as much go-juice.

 

[Cobby08]

What dis pease? MS 2-fiddy with MM????

I nicknamed it pisser. Its a MS 250 with a muffler mod which is just a gutted muffler with a angle pipe brazed on it and the 215 carb. For $300 you can drop it, roll a log over it (has happened more than once) and still cannot kill the thing.

 

[Lightning Performance]

I nicknamed it pisser. Its a MS 250 with a muffler mod which is just a gutted muffler with a angle pipe brazed on it and the 215 carb. For $300 you can drop it, roll a log over it (has happened more than once) and still cannot kill the thing.

It's cousin is an 018 hiding in pile among pro saws. Plug threads have been lets say re-angled. Just moved a bit.

 

[Wood Chopper]

I nicknamed it pisser. Its a MS 250 with a muffler mod which is just a gutted muffler with a angle pipe brazed on it and the 215 carb. For $300 you can drop it, roll a log over it (has happened more than once) and still cannot kill the thing.

[emoji106] Nice. Haven’t thought about molesting my 250. Now I have. Lol


Sent from my iPhone using Tapatalk

 

[David Young]

I'm not bringing a damn thing.

You should reconsider.


I think you should bring some tooth picks...