1128 Series Month

[MustangMike]

Drill the main on the 461 will do the same Im betting

I've been told there are differences with the 461 carb that are not just related to the jet size, that it is an improved design.

 

[Deets066]

I've been told there are differences with the 461 carb that are not just related to the jet size, that it is an improved design.

Bigger Venturi

 

[RI Chevy]

I think venturis are the same size. According to the guy from Walbro that I spoke with.

 

[Deets066]

I think venturis are the same size. According to the guy from Walbro that I spoke with.

Oh, I sure thought someone said they had a bigger Venturi. Guess I was mistaken

 

[MustangMike]

The performance of the HD-50 seems to be inversely hampered by the smaller jet size.

 

[Canadian farm boy]

@mdavlee do you or anyone else happen to know if there's ceramic clutch side crank bearings available for 044/046?

 

[Adirondackstihl]

I can't find the HD11 that @Definitive Dave gave me at the GTG

 

[hseII]

Nice saw and bar.

Thank You.

You've handled them Both.

Again,
Thank You Brian

 

[hseII]

I can't find the HD11 that @Definitive Dave gave me at the GTG

[emoji20]

 

[Deets066]

@mdavlee do you or anyone else happen to know if there's ceramic clutch side crank bearings available for 044/046?

Then can be made

Brad has done it I believe

 

[mdavlee]

Dominant saw has them already made ready to go

 

[Canadian farm boy]

Dominant saw has them already made ready to go

Thanks mike. I looked on the web site but didn't see any bearings for 044 listed.
Guess I just need to contact them and ask?

 

[Adirondackstihl]

[emoji20]

I know
I've looked everywhere

 

[Redfin]

I know
I've looked everywhere

Well, not everywhere...

 

[RI Chevy]

It will show up, after you get another one. Lol

Sent from my SM-G930V using Tapatalk

 

[Mastermind]

I drill the main jet to a #70 on ever 1128 carb I fondle.

 

[MustangMike]

I drill the main jet to a #70 on ever 1128 carb I fondle.

So this was already done on my 460 you ported?

 

[junkman]

So this was already done on my 460 you ported?

You need recipe version 12.9 for that ,you are still on recipe 2 ,you better get a new saw ,it is outdated .

 

[Deets066]

I drill the main jet to a #70 on ever 1128 carb I fondle.

Seems kinda big?

My 66 is only a #64 jet

 

[Ron660]

Looks like the HD-11 came stock on the Arctic model. No need for it since Randy opens them up!