makita

Looking for cross reference IPL's of chainsaws branded forth and back between Dolmar/Makita/Maruyama I came across Maruyama's official download page and thought someone here might find it useful. Good luck finding what You are looking for! :) Official download page...

I don’t like the heat the cat retains in the muffler, So I drilled out the two tacks of weld holding the housing the cat is attached to, I then cut the cat out and tidied up the hole this left. All I want to do is make the the saw run a bit cooler, will the removal of the cat play a big enough...

Looking for a complete project saw or a runner. Makita colors preferred but not a deal breaker. Thanks for looking

Wanting a builder saw, I have a good used 7900 top end, just need a good set of cases and crank. I want to build one and port it for an event to be given away. It would help though if it had all of the covers as well.

Have a nice Makita 9010 for sale. Saws stock and is all OEM as far as I know. I swapped the carb from this saw with my Dolmar 9010 and it seemed to like it better. It’s a bing I believe. There is also one label missing behind the clutch cover that you can see in the pic. I think you can still...

This is the official thread for @GCJenks204 Gary's entry in the build off. Gary found a Home Depot saw a DCS6410. Had it sent to me along with the larger 7910 P&C for it. Was supposed to be straight gassed, wasn't so... Somebody forgot something... Here it is! That's betterer.

I am looking at upgrading my mishmash collection of cordless tools and focus my efforts on one system. I know there are Milwaukee guys ans Makita guys hear and I want to hear their thoughts but any Bosch guys here? A friend of mine who's family owns a tool and fastener company right away...

I've got an idea to help the 7900 saws get a bit more oil on the chain, or at least make the adjuster screw last a little longer. Most have seen @jar944 oiler screw he turned out of 6160, but I realize that it is out of many people's resources. So, I plan to remove the end nub off of the plastic...

Where's the new 90cc class dolmar/makita? Keep hearing both ways from respectable sources.. so what's the deal?

NOTE, the Dolmar.de page us dead, go to the Makita.de page posted below! http://www.dolmar.de/downloads/bedienungsanleitungen.html Owner manuals for many if not most Dolmar & Sachs-Dolmar products. The files are in PDF format. All manuals that I checked/downloaded are in German, but I think...

Hi everyone, as some already know I ended up with a New Stihl 362 MT, its sitting here unused and I would like to swap for a Dolmar or Makita 6100. I suppose this offer will applay to those in my durisdiction, as complications arrise when I take a product in from outside the EU, in plain words...

Hello again everyone. I need your opinions regarding the correct mix and carb adjustment on a Makita 6100 This saw is Stratafied, it has a reed vavle, this concerns me in regard to keeping it as clean as possible, and the only way to do this is to use the correct mix ratio and tune it to run...

NOTE, the Dolmar.de page us dead, go to the Makita.de page posted below! http://www.dolmar.de/downloads/ersatzteillisten.html IPL's for many if not most Dolmar & Sachs-Dolmar products. The files are in PDF format, mostly multilingual including German, English, French & Spanish. The IPL's are...

If you were to buy a 60 cc saw, would you go for the Echo 620, or for a slight increase in weight would you opt for the 7300. I realise the Echo is heavy for its cc 's, but it does seem to have torque that keeps it pulling instead of slowing down a lot, and heaver again is the 7300, but I can...

Hi guys- I'm after a stock Solo 665, 675, or 681. I have lots to trade and cash. Thanks!

So I thought about buying a Saw yesterday and was going to spend a decent amount of money on it and decided it just wasn't for me, but it was going to be a last hurrah before having to cut back on my buying, so I decided to get something I really want, and that's a makita dcs7900, ported or...

Hi everyone Looking about I can get a Makita EA7900P45E for the right money. First off, are they the same as the Dolmar in all but colour or are they a cheaper spec and build quality or are they an off shoot that differs signivigently. Am wondering if anyone is using one or has any experience...

Have a few. Regular Efco, John Deere efco, and Cub Cadet efco. Running: X John Deere CS40 With bar and chain Sold X Efco MT-5200 I believe I have the bar and chain for this Sold Efco MT-3500 With bar and chain Not Running: X John Deere CS 36 - parts saw Sold X Cub Cadet cs5018. Runs...

Looking for this saw in blue. Willing to spend $250 Or willing to trade a nice Dolmar PS-421 for one. If you prefer orange, great chance to switch! Lol. Feel free to comment or message me. Thank you.

I have a Poulan s-6000 aka Dolmar 152? that has a serious oiler problem. I thought the drive gears might be shot but after removing clutch and oil pump I discovered that there was No oiler adjustment screw or related parts. I have not been able to locate an oil pump ,but have found out, I...