shawn022
Super OPE Member
- Local time
- 8:56 PM
- User ID
- 1054
- Joined
- Mar 20, 2016
- Messages
- 98
- Reaction score
- 265
- Location
- Williamsburg VA
What do I do? Get an oem flag? 288 flag?
It is a very clean saw.That looks brandy new!
I think the 394/395 is the same handle as the 288/281
wish I could say the same, 242, 2×346 xpg customer saw in for porting. Then my own projects, 238sg, 242g, 242xpg, 254xpg, 266xpg, 2×345, 350, 2×353, 357xpg, 359, 362xpg, 2×372xpg, 550xpg, 560xpg, and I plan to visit my dealers one of those daysNothing on my bench right now but my own 372XP. No customer saws and hope it stays that way until Spring..
Your shop is full of heated handle orange awesomeness !wish I could say the same, 242, 2×346 xpg customer saw in for porting. Then my own projects, 238sg, 242g, 242xpg, 254xpg, 266xpg, 2×345, 350, 2×353, 357xpg, 359, 362xpg, 2×372xpg, 550xpg, 560xpg, and I plan to visit my dealers one of those days
STUPID ME!!! I got a Chinese 660 running last week, motor sounded great, but it did not oil!!!
So I finished up the next one, and same result! Then I started thinking about it. These 660s drink a lot, so I just put about 1/3 tank of fuel in em, in case there is carb trouble you don't want a full tank. (The first one I built the valve had to be adujsted).
So I did the same on the oiler side ... BIG MISTAKE!!! As I thought about it, I realized the oiler probably needs to be primed, like an old water pump, so the tank needs to be near full for it to work the first time.
That was it ... both oilers work ... I feel foolish.
On the bright side, both saws are done and ready to go, with Cross MMWS P+Cs. They both sound real good, can't wait to get them into some wood.
Here are the Asian Twins, ready to go: