- Local time
- 3:00 AM
- User ID
- 2523
- Joined
- Jan 24, 2017
- Messages
- 4,943
- Reaction score
- 22,891
- Location
- Berkshire County, Massachusetts
@Miller Mod Saws I watched the video of that 665 solo today, that is a hateful bytch! Nice job buddy!
Thank you. It's getting there. Thinking of tweaking another cylinder to see if I can get a happy medium.@Miller Mod Saws I watched the video of that 665 solo today, that is a hateful bytch! Nice job buddy!
It would be in the same class as the 365 husky, 6400 Dolmar, etc.What other makes and model of saw would you compare it to, Carl?
I'll post it up for ya to watch again. Lol.@Miller Mod Saws I watched the video of that 665 solo today, that is a hateful bytch! Nice job buddy!
Thank you. It's getting there. Thinking of tweaking another cylinder to see if I can get a happy medium.
Thanks my man. I really think I just want to raise my lower exhaust jug for now. See if I can get close to the rpm I'm running on the 98 jug but broaden the torque band just a tad if I fark that up I maybe calling. Lol. At 98 I can say it's really close to needing an unlimited coil. It does not like a dull chain. Lol.I know a guy with lots of 665 top ends.
That's a mean sounding saw Mr. Miller Mod. Hot dang!
I took my 357 in the woods with me again today and decided to see what it could do. I have always kept the tune at a safe 14k for normal work. That being said I've never cranked it up to see what it was capable of. Today, I tuned my saw up to 15.2k where it was still safely 4-strokin and made a few cuts. The chain was loading the saw perfect at 12.8k and all cuts were made with no pressure except where dogging in obviously. It leaned out a little more after getting good and hot but it never lean bogged. The tach shows that once it was hot it was hitting 15.3k and the 4 stroking was pretty much gone. After this experience I'm thinking no more than 15k no load tune for this saw when I'm playing around. I tightened my chain after making these cuts. I really don't know why there isn't a bigger fan club of these saws, it just flat runs after being ported.
Thanks guys.Lookin real good Carl!
Damn Jim, that saw rips.I almost have too many blisters on my fingers from filing chain to make these cuts, Lol. But I'm starting to feel like I might be getting somewhere with it.
Here's 12 hours of grinding to get .12 second faster.
Nice work Jim!! Looks like it pulls aggressive, and looked pretty smooth!!I almost have too many blisters on my fingers from filing chain to make these cuts, Lol. But I'm starting to feel like I might be getting somewhere with it.
Here's 12 hours of grinding to get .12 second faster.
Sounds great again Carl, nice job man.Retweaked the other jug tonight. I like this one better.
Not a big difference but this one has a better torque band. We'll see how she does after a few tanks.
Carl Miller, I'm gonna start calling you "The Gun Show" with you wearing those sleeveless shirts lolRetweaked the other jug tonight. I like this one better.
Not a big difference but this one has a better torque band. We'll see how she does after a few tanks.
No sleeves=air conditioning. Lol. This old boy dosnt like hot.Carl Miller, I'm gonna start calling you "The Gun Show" with you wearing those sleeveless shirts lol
Nice Solo, amigo!