popopboat
Super OPE Member
- Local time
- 6:37 PM
- User ID
- 10479
- Joined
- Sep 17, 2019
- Messages
- 403
- Reaction score
- 637
- Location
- Croatia
So i had this chinese 52cc cylinder and it was mirror glazed, been thinking for a while how could i hone this one.. Flex hone is too agressive on ports and side channels, 3 stone hole wouldnt work because of side channels (probably). And i didnt really want to spend money on it
So i tried with this configuration hehe, seems to work
*NOTE* This cylinder is unusable and only for experiments, i know i need 45° pattern but this was first attempt
So i tried with this configuration hehe, seems to work
*NOTE* This cylinder is unusable and only for experiments, i know i need 45° pattern but this was first attempt