Raffle for Paragonbuilder's friend whose wife has breast cancer

[paragonbuilder]

@lfnh passed,
@cease232 you are up!

 

[cease232]

I'll take #14, Makita. I've never won chit my whole life so this is awesome! Thanks again to everyone involved and Thank you OPE for being such a great place to hang out.
Jeremiah

Sent from my iPhone using Tapatalk Pro

 

[Miller Mod Saws]

I'll take #14, Makita. I've never won chit my whole life so this is awesome! Thanks again to everyone involved and Thank you OPE for being such a great place to hang out.
Jeremiah

Sent from my iPhone using Tapatalk Pro

Pm me your addy and which one ya would like and I'll get it shipped to ya.

 

[paragonbuilder]

I'll move each winner to their choice as they are picked to keep things updated.
And I'll put my [emoji41] in front of completed items.

11 @lfnh (passed)

13 @exSW
14 @stihl livin
15 @Kensie1988
16 @Poleman
17 @malk315
18 @Tpagel
19 @sunfish
20 @Jon1212
21 @RI Chevy
22 @Finnrpm
23 @Duce
24 @malk315
25 @Czed
26 @Hinerman
27 @Big1066ih
28 @backhoelover
29 @CapitaineHaddoc
30 @jacob j[/QUOTE]



[emoji41]1. (7 @Ryan Browne)
Husky 262XP with KS jug / HDA87 carb many new parts including seals, carb kit, no base gasket + squish adjusted, ports touched a bit, needs very little PHO from @malk315

[emoji41]2. (2 @Beavis331)
Husky 576XP from @Onan18 including new jug, @Moparmyway will install to make it work ready.

[emoji41]3. (5 @dieselfitter) Port job by @tree monkey

4. NOS Total Super Bar 20" Husky small mount from @Czed pictured in his post below.

5. 3 new chain loops shipped. Have square or full chisel Oregon 3/8 .050 Ideally 24" or less from @Armbru84

[emoji41]6. (3 @Sleeper)
Husky 262XP rebuilt and work ready with optional port work (winners choice) from @paragonbuilder

7. Muffler mod by @Miller Mod Saws (you send muffler to Carl, @svk from AS will cover the cost for him to perform the work and return) OR $50 off a woods port at Miller Mod Saws. from @svk on AS

[emoji41]8. (4 @huskihl)
Makita/Dolmar DCS6421 saw -- see pictures below in this thread from @astnmacgto [/B]

9. Brand new, never used SIP Protection stretch security pants. Size L. see @CapitaineHaddoc pictures below. 38-35" waist with 32" length.

[emoji41]10. (8 @huskyboy)
Woods port from @Mastermind

[emoji41]11. (6 @Moparmyway)
Stihl 036 totally gone through with new bearings, seals, gaskets, carb kit, fuel line & filter, impulse line, rings, squish and base cut, ported and work ready PHO from @Poleman Pictures below see his post.

[emoji41]12. (10 @Leerod83)
NIB Stihl ES bar 20" 72DL & 2 x new 72DL A1LM Carlton chains see pics below from @GCJenks204

13. Brand new wool w/ nylon chainsaw pants...size 44x32 from @bowtechmadman on AS.

[emoji41]14. (12 @cease232)
Winner take his choice from 1 of these. Or heck I'm not picky. If the winner wants a different makita tool we can work out something: 18V LXT Li-Ion 1/2" Hammer driver-drill kit or 18V LXT Li-Ion Impact driver kit from @Miller Mod Saws

[emoji41]15. (9 @Dub11)
Custom built benchmount chainsaw vise from @Mycamaro_68

16. Stihl 015 top handle with original case AND the original manual. Saw is in fantastic shape and starts on 2nd or 3rd pull, lots of compression, runs great. I have a new chain ordered from Forester. From @dahmer on AS

[emoji41]17. (1 @GCJenks204)
Chainsaw "starter" repair kit (it's got a LOT of tools for working on saws) looks like it is geared towards Stihl saws. See pictures from Dave in this thread. A great prize from @Definitive Dave

 

[paragonbuilder]

@exSW you are up!

 

[exSW]

#7 Mufflers by Miller

 

[stihl livin]

I will take #5 from @Armbru84

 

[paragonbuilder]

I'll move each winner to their choice as they are picked to keep things updated.
And I'll put my [emoji41] in front of completed items.

11 @lfnh (passed)



15 @Kensie1988
16 @Poleman
17 @malk315
18 @Tpagel
19 @sunfish
20 @Jon1212
21 @RI Chevy
22 @Finnrpm
23 @Duce
24 @malk315
25 @Czed
26 @Hinerman
27 @Big1066ih
28 @backhoelover
29 @CapitaineHaddoc
30 @jacob j[/QUOTE]



[emoji41]1. (7 @Ryan Browne)
Husky 262XP with KS jug / HDA87 carb many new parts including seals, carb kit, no base gasket + squish adjusted, ports touched a bit, needs very little PHO from @malk315

[emoji41]2. (2 @Beavis331)
Husky 576XP from @Onan18 including new jug, @Moparmyway will install to make it work ready.

[emoji41]3. (5 @dieselfitter) Port job by @tree monkey

4. NOS Total Super Bar 20" Husky small mount from @Czed pictured in his post below.

[emoji41]5. (14 @stihl livin)
3 new chain loops shipped. Have square or full chisel Oregon 3/8 .050 Ideally 24" or less from @Armbru84

[emoji41]6. (3 @Sleeper)
Husky 262XP rebuilt and work ready with optional port work (winners choice) from @paragonbuilder

[emoji41]7. (13 @exSW)
Muffler mod by @Miller Mod Saws (you send muffler to Carl, @svk from AS will cover the cost for him to perform the work and return) OR $50 off a woods port at Miller Mod Saws. from @svk on AS

[emoji41]8. (4 @huskihl)
Makita/Dolmar DCS6421 saw -- see pictures below in this thread from @astnmacgto [/B]

9. Brand new, never used SIP Protection stretch security pants. Size L. see @CapitaineHaddoc pictures below. 38-35" waist with 32" length.

[emoji41]10. (8 @huskyboy)
Woods port from @Mastermind

[emoji41]11. (6 @Moparmyway)
Stihl 036 totally gone through with new bearings, seals, gaskets, carb kit, fuel line & filter, impulse line, rings, squish and base cut, ported and work ready PHO from @Poleman Pictures below see his post.

[emoji41]12. (10 @Leerod83)
NIB Stihl ES bar 20" 72DL & 2 x new 72DL A1LM Carlton chains see pics below from @GCJenks204

13. Brand new wool w/ nylon chainsaw pants...size 44x32 from @bowtechmadman on AS.

[emoji41]14. (12 @cease232)
Winner take his choice from 1 of these. Or heck I'm not picky. If the winner wants a different makita tool we can work out something: 18V LXT Li-Ion 1/2" Hammer driver-drill kit or 18V LXT Li-Ion Impact driver kit from @Miller Mod Saws

[emoji41]15. (9 @Dub11)
Custom built benchmount chainsaw vise from @Mycamaro_68

16. Stihl 015 top handle with original case AND the original manual. Saw is in fantastic shape and starts on 2nd or 3rd pull, lots of compression, runs great. I have a new chain ordered from Forester. From @dahmer on AS

[emoji41]17. (1 @GCJenks204)
Chainsaw "starter" repair kit (it's got a LOT of tools for working on saws) looks like it is geared towards Stihl saws. See pictures from Dave in this thread. A great prize from @Definitive Dave[/QUOTE]

 

[paragonbuilder]

@Kensie1988 you are up!

 

[Kensie1988]

I would like to say that I enjoyed being a part of this experience, helping make a difference and change someone's life, it's really great that you all as a comment come together for people you don't even know, I'm glad to be a part of it and hopefully will continue to be in the future.

I would be honored to accept #4 as my choice.

Kensie

 

[Poleman]

Pass for me...

 

[paragonbuilder]

I'll move each winner to their choice as they are picked to keep things updated.
And I'll put my [emoji41] in front of completed items.

11 @lfnh (passed)
16 @Poleman(passed)


17 @malk315
18 @Tpagel
19 @sunfish
20 @Jon1212
21 @RI Chevy
22 @Finnrpm
23 @Duce
24 @malk315
25 @Czed
26 @Hinerman
27 @Big1066ih
28 @backhoelover
29 @CapitaineHaddoc
30 @jacob


[emoji41]1. (7 @Ryan Browne)
Husky 262XP with KS jug / HDA87 carb many new parts including seals, carb kit, no base gasket + squish adjusted, ports touched a bit, needs very little PHO from @malk315

[emoji41]2. (2 @Beavis331)
Husky 576XP from @Onan18 including new jug, @Moparmyway will install to make it work ready.

[emoji41]3. (5 @dieselfitter) Port job by @tree monkey

[emoji41]4. (15 @Kensie1988)
NOS Total Super Bar 20" Husky small mount from @Czed pictured in his post below.

[emoji41]5. (14 @stihl livin)
3 new chain loops shipped. Have square or full chisel Oregon 3/8 .050 Ideally 24" or less from @Armbru84

[emoji41]6. (3 @Sleeper)
Husky 262XP rebuilt and work ready with optional port work (winners choice) from @paragonbuilder

[emoji41]7. (13 @exSW)
Muffler mod by @Miller Mod Saws (you send muffler to Carl, @svk from AS will cover the cost for him to perform the work and return) OR $50 off a woods port at Miller Mod Saws. from @svk on AS

[emoji41]8. (4 @huskihl)
Makita/Dolmar DCS6421 saw -- see pictures below in this thread from @astnmacgto [/B]

9. Brand new, never used SIP Protection stretch security pants. Size L. see @CapitaineHaddoc pictures below. 38-35" waist with 32" length.

[emoji41]10. (8 @huskyboy)
Woods port from @Mastermind

[emoji41]11. (6 @Moparmyway)
Stihl 036 totally gone through with new bearings, seals, gaskets, carb kit, fuel line & filter, impulse line, rings, squish and base cut, ported and work ready PHO from @Poleman Pictures below see his post.

[emoji41]12. (10 @Leerod83)
NIB Stihl ES bar 20" 72DL & 2 x new 72DL A1LM Carlton chains see pics below from @GCJenks204

13. Brand new wool w/ nylon chainsaw pants...size 44x32 from @bowtechmadman on AS.

[emoji41]14. (12 @cease232)
Winner take his choice from 1 of these. Or heck I'm not picky. If the winner wants a different makita tool we can work out something: 18V LXT Li-Ion 1/2" Hammer driver-drill kit or 18V LXT Li-Ion Impact driver kit from @Miller Mod Saws

[emoji41]15. (9 @Dub11)
Custom built benchmount chainsaw vise from @Mycamaro_68

16. Stihl 015 top handle with original case AND the original manual. Saw is in fantastic shape and starts on 2nd or 3rd pull, lots of compression, runs great. I have a new chain ordered from Forester. From @dahmer on AS

[emoji41]17. (1 @GCJenks204)
Chainsaw "starter" repair kit (it's got a LOT of tools for working on saws) looks like it is geared towards Stihl saws. See pictures from Dave in this thread. A great prize from @Definitive Dave

 

[paragonbuilder]

@malk315
Eric your brother is up!

 

[malk315]

My bro is going to pass. SIL pants woulda been sweet but not the right size. Or the other ones. Fixed size a little tough hopefully someone can a nice set for work in the woods. Already have 2 top handles!

@Tpagel you are now up!

Sent from my XT1585 using Tapatalk

 

[Tpagel]

I would happy to have #9 the Chainsaw pants.


Good on you guys for doing this for a friend.
Thanks to all who donated prizes.
Thanks
Travis

Sent from my SM-J327V using Tapatalk

 

[Jon1212]

@sunfish

 

[Mastermind]

High Fives All Around !!!!!!!!!

Good stuff fellers.

 

[Czed]

I would like to say that I enjoyed being a part of this experience, helping make a difference and change someone's life, it's really great that you all as a comment come together for people you don't even know, I'm glad to be a part of it and hopefully will continue to be in the future.

I would be honored to accept #4 as my choice.

Kensie

Pm me your address, and I will send it your way.

 

[paragonbuilder]

I'll move each winner to their choice as they are picked to keep things updated.
And I'll put my [emoji41] in front of completed items.

11 @lfnh (passed)
16 @Poleman(passed)
17 @malk315(passed)


19 @sunfish
20 @Jon1212
21 @RI Chevy
22 @Finnrpm
23 @Duce
24 @malk315
25 @Czed
26 @Hinerman
27 @Big1066ih
28 @backhoelover
29 @CapitaineHaddoc
30 @jacob


[emoji41]1. (7 @Ryan Browne)
Husky 262XP with KS jug / HDA87 carb many new parts including seals, carb kit, no base gasket + squish adjusted, ports touched a bit, needs very little PHO from @malk315

[emoji41]2. (2 @Beavis331)
Husky 576XP from @Onan18 including new jug, @Moparmyway will install to make it work ready.

[emoji41]3. (5 @dieselfitter) Port job by @tree monkey

[emoji41]4. (15 @Kensie1988)
NOS Total Super Bar 20" Husky small mount from @Czed pictured in his post below.

[emoji41]5. (14 @stihl livin)
3 new chain loops shipped. Have square or full chisel Oregon 3/8 .050 Ideally 24" or less from @Armbru84

[emoji41]6. (3 @Sleeper)
Husky 262XP rebuilt and work ready with optional port work (winners choice) from @paragonbuilder

[emoji41]7. (13 @exSW)
Muffler mod by @Miller Mod Saws (you send muffler to Carl, @svk from AS will cover the cost for him to perform the work and return) OR $50 off a woods port at Miller Mod Saws. from @svk on AS

[emoji41]8. (4 @huskihl)
Makita/Dolmar DCS6421 saw -- see pictures below in this thread from @astnmacgto [/B]

[emoji41]9. (18 @Tpagel)
Brand new, never used SIP Protection stretch security pants. Size L. see @CapitaineHaddoc pictures below. 38-35" waist with 32" length.

[emoji41]10. (8 @huskyboy)
Woods port from @Mastermind

[emoji41]11. (6 @Moparmyway)
Stihl 036 totally gone through with new bearings, seals, gaskets, carb kit, fuel line & filter, impulse line, rings, squish and base cut, ported and work ready PHO from @Poleman Pictures below see his post.

[emoji41]12. (10 @Leerod83)
NIB Stihl ES bar 20" 72DL & 2 x new 72DL A1LM Carlton chains see pics below from @GCJenks204

13. Brand new wool w/ nylon chainsaw pants...size 44x32 from @bowtechmadman on AS.

[emoji41]14. (12 @cease232)
Winner take his choice from 1 of these. Or heck I'm not picky. If the winner wants a different makita tool we can work out something: 18V LXT Li-Ion 1/2" Hammer driver-drill kit or 18V LXT Li-Ion Impact driver kit from @Miller Mod Saws

[emoji41]15. (9 @Dub11)
Custom built benchmount chainsaw vise from @Mycamaro_68

16. Stihl 015 top handle with original case AND the original manual. Saw is in fantastic shape and starts on 2nd or 3rd pull, lots of compression, runs great. I have a new chain ordered from Forester. From @dahmer on AS

[emoji41]17. (1 @GCJenks204)
Chainsaw "starter" repair kit (it's got a LOT of tools for working on saws) looks like it is geared towards Stihl saws. See pictures from Dave in this thread. A great prize from @Definitive Dave

 

[paragonbuilder]

@sunfish

Bump