166
Habada
- Local time
- 10:53 PM
- User ID
- 386
- Joined
- Jan 2, 2016
- Messages
- 1,771
- Reaction score
- 10,887
- Location
- Greenwich, NY
I don't think this saw hasn't been started since last October.
You really like piss revving a saw till she pisses herself all over the floor don't You.I don't think this saw hasn't been started since last October.
I don't think this saw hasn't been started since last October.
The video i posted was the first time trying to start that saw since October.Mine does that stumble for 20-30 sec, that cleared up fast Steve. If I pull the trigger it falls on its face
The video i posted was the first time trying to start that saw since October.
Just went out and ran it some more. Almost no hesitation after startup this time.
This saw only has a little muffler mod.
Perhaps that’s all it needs. I haven’t touched mine yet.
Have you done any other work other then the muffler mod?Did a little more tweaking to the 3601. Running 13,800ish but still needs 6 or 7 seconds of warm up. With a normal load cutting it's running in the 10,000 rpm range with quite a bit of torque.
But I let my demo guy run it and he's keeping it. We're both thinking it will run with a 4300/421. Will do some video with both saws in the same log.
Have you done any other work other then the muffler mod?
I don't think this saw hasn't been started since last October.
I would still like to see one of these built to the hilt. May have to send mine off. ?Anyone have more developments on the 3601/ps-352 ? looked into muffler work ? Has used the saw for a while to gauge its performance ..........
Things have gone a bit QT on this saw over here Corey. The fact that they are not that far from the price of a Ps-420/421 sc on a good deal day (there more than a ps 420/421 at the moment) and from the one i used hasn't the same grunt in overall comparison (not a shock really). The ps-35 is the same power and a lot cheeper without being a poor build design , so the EA3601/Dolmar Ps- 352 is a bit "Niche" market at the moment.I would still like to see one of these built to the hilt. May have to send mine off. ?
Folks, looks like we have a strong nominee for “piss rev” of the year 2018! LolI don't think this saw hasn't been started since last October.