Crank Seal removal tools

[Rich Fife]

My buddy works at a small engine repair shop... he asked me if I would make him a few different size tools to remove crank seals... I did and of course I had to try them out... well, needless to say, I'm making myself some of these but a m better version.

 

[Rich Fife]

These are simple to make

 

[srcarr52]

There is a Husqvarna tool that I know fits the larger models 181 and up size seals. I don't think they have one for smaller saws.

GENUINE CRANK SEAL PULLER EXTRACTOR TOOL FITS HUSQVARNA 504914001

www.sawsalvage.co

You must have a taper attachment to cut threads on an angle like that?

 

[beaglebriar]

There is a Husqvarna tool that I know fits the larger models 181 and up size seals. I don't think they have one for smaller saws.

GENUINE CRANK SEAL PULLER EXTRACTOR TOOL FITS HUSQVARNA 504914001

www.sawsalvage.co

You must have a taper attachment to cut threads on an angle like that?

I have that tool. It kinda sucks

 

[srcarr52]

I have that tool. It kinda sucks

I use the Holzfforma dual arm style one. It does ok.

 

[huskihl]

I have the Lisle. Works on everything so far

 

[Dolkitafreak]

I have the Lisle. Works on everything so far

Same, I like it.

 

[Squareground3691]

Home job , works well , the Lisle a nice tool to ,

 

[beaglebriar]

I use the Holzfforma dual arm style one. It does ok.

I may grab one of those. I always worry about scoring the bore with the pry bar style.

 

[Rich Fife]

You must have a taper attachment to cut threads on an angle like that?

I do have a taper attachment.

I've machined small, medium and big pullers.... I feel these work great... depending on your thread pitch and angle... I've tried 11tpi up to 18 tpi with different angles... some bite harder than others... while others need a little more downward pressure (when compared to others) in order to initiate the bite.

 

[Rich Fife]

I have the Lisle. Works on everything so far

I'm not familiar with it.

 

[huskihl]

I'm not familiar with it.

Lisle 58430 Lisle Seal Pullers | Summit Racing

Free Shipping - Lisle Seal Pullers with qualifying orders of $109. Shop Seal Puller and Installers at Summit Racing.

www.summitracing.com

 

[Maintenance Chief]

I have had the lisle for awhile and just broke the tip on it.
I also have various old flat heads modified for seal pulling.

 

[Al Smith]

A drywall screw works well .

 

[Czed]

Lisle 58430 Lisle Seal Pullers | Summit Racing

Free Shipping - Lisle Seal Pullers with qualifying orders of $109. Shop Seal Puller and Installers at Summit Racing.

www.summitracing.com

You must be right handed
Because i tried that damn lisle on all kinds of seals
It's resting in the woods after i threw it there
I have a multitude of screwdrivers to pop seals out no hassle no fighting no cussing no drama
The seals just come out
Unlike that lisle *s-word.

 

[huskihl]

You must be right handed
Because i tried that damn lisle on all kinds of seals
It's resting in the woods after i threw it there
I have a multitude of screwdrivers to pop seals out no hassle no fighting no cussing no drama
The seals just come out
Unlike that lisle *s-word.

It’s reversible. I usually take the end off and get it in place first. Sometimes you have to apply the 10% rule

 

[Steelie90]

I have had the lisle for awhile and just broke the tip on it.
I also have various old flat heads modified for seal pulling.

Replacement tips are available, I bought a couple extra and cut down for smaller 044 seals etc

 

[Duce]

This has not failed me yet. Any of prying tools, need to be careful not to scratch case.

 

[huskihl]

This has not failed me yet. Any of prying tools, need to be careful not to scratch case.View attachment 402929View attachment 402930

Yeah that would be better yet. I figured it was too big to work on a chainsaw

 

[Squareground3691]

This has not failed me yet. Any of prying tools, need to be careful not to scratch case.View attachment 402929View attachment 402930

Looks like the same tool ,I use to remove my truck wheel bearing seals ,