All things Hybrid

[thedude74]

Mounting holes side to side I.D.

 

[hacskaroly]

Carb still mounted for orientation reference.

Thanks!! With all that gunk on there, it makes it look like the carb/cylinder is all one piece...lol

 

[Ketchup]

Generally any 34mm stroke cylinders on a 32mm stroke frame?
Did I read about Husqvarna 55 with 61 top?

I put a 357 jug (34mm stroke) on an Echo 490 (33mm stroke). It could potentially be crammed on a 346xp or similar. Depends on rod length and deck height.

 

[thedude74]

Thanks!! With all that gunk on there, it makes it look like the carb/cylinder is all on piece...lol

No worries brother. Let me know if you need anymore dimensions. Haha yeah it's filthy for sure.

 

[thedude74]

Woodslasher's 056/066 hybrid build

Woodslasher's 056/066 hybrid build

Since I couldn't find a good how-to thread on how to put an 056 Mag II piston/cylinder on an 066 chassis, I decided I might as well write up how I'm doing it. Be forewarned, this thread will move along at the same pace that the saw is, so there might be large gaps between posts. Also, the 066 I...

opeforum.com