572 updates

[LOMartin]

Ya, kinda woodsy

LMAO

 

[MarcS]

Wow rough casting finish on those pictures. I wouldn’t expect that from a pro saw.

Could be a new market opportunity for a porter to grind all the castings smooth and improve fit and finish. Might even lighten up the saw a few ounces!

 

[huskyboy]

Could be a new market opportunity for a porter to grind all the castings smooth and improve fit and finish. Might even lighten up the saw a few ounces!

LOL! Don’t give any of the ocd psp’s any new ideas.

 

[MarkEagleUSA]

Wow rough casting finish on those pictures.

If that's all there is to complain about with this saw...

 

[dustinwilt68]

I already sand my cases before I send them for powder. Take out any imperfections, why pay not to get a nice finish back?

 

[hseII]

I intended to do a detailed thread on the 572, and the 462......but lost all the picture I had for both of them.

Then......I decided that doing threads was a pain in the ass.

Size like Mine or Yours?


Sent from my iPhone using Tapatalk Pro

 

[deeddale]

If that's all there is to complain about with this saw...

No complaints here on casting flash- was happy on inspection this morning of 572xp air filtration ,note , starting fourth tank of fuel

 

[A.E. Metalwerx]

Ran my 572 for the first time today. I was impressed how it ran for being on its first tank of fuel and only being muffler modded. Smooth is the best word I can use. Seems like the soft limit is 13200 and it did continue to climb to 13400. One thing that stood out to me was how light the side cover was. Good? Bad? Not sure. Also with the stock spikes the muffler rubs. But that’s not a big deal since it has the extra support built into the muffler.

 

[shadco]

Side cover is very light, had the same thought.

.

 

[huskyboy]

Ran my 572 for the first time today. I was impressed how it ran for being in its first tank of fuel and only being muffler modded. Smooth is the best word I can use. Seems like the soft limit is 13200 and it did continue to climb to 14400. One thing that stood out to me was he light the side cover was. Good? Bad? Not sure. Also with the stock spikes the muffler rubs. But that’s not a big deal since it has the extra support built into the muffler.

14.4k? Wow that’s real good for pretty much stock! Wonder if the 565 has a lower rev limit?

 

[A.E. Metalwerx]

14.4k? Wow that’s real good for pretty much stock! Wonder if the 565 has a lower rev limit?

Oops! 13400!

 

[huskyboy]

Oops! 13400!

Lol that sounds more realistic

 

[MustangMike]

No way the 462 is nose heavy with the 20" light bar on it, but I'm sure it would be very nose heavy with a standard ES bar, I can't stand them on the 362 either, just ruins the balance of the saws. The ES bars feel fine on 460s, but that is because the power head is so much heavier.

No matter what you run, the correct components are important.

 

[Matt L]

This thing cuts wood like it is angry ....

 

[old guy]

Snow's going away here, maybe I can get mine in some wood soon,

 

[deeddale]

This thing cuts wood like it is angry ....

View attachment 170739
View attachment 170740

Congrats to you Matt L What chain Is on your 572 ? What is available from your dealer ?

 

[Czed]

Damn they want 462 money for this one
https://www.ebay.com/itm/HUSQVARNA-...331445?hash=item3b2d416735:g:bWQAAOSwQVlciDz9

 

[dustinwilt68]

Crazy.

 

[TreeLife]

Damn they want 462 money for this one
https://www.ebay.com/itm/HUSQVARNA-...331445?hash=item3b2d416735:g:bWQAAOSwQVlciDz9

Ridiculous. I was quoted 800 bucks with a 20" bar out the door.

 

[zero_sum]

Yeah, prices are varying widely it seems. I was quoted 1,000 locally.