Was a Moe 394, now a Joe 395

Moparmyway · Jun 6, 2019

RI Chevy said:
You'll have a super stout saw soon Joe!

My goodness, I certainly hope I havent built a dud

RI Chevy · Jun 6, 2019

Your builds are uber strong Kevin! No worries. [emoji106][emoji482]

longleaf · Jun 6, 2019

RI Chevy said:
Your builds are uber strong Kevin! No worries. [emoji106][emoji482]

Agreed

srcarr52 · Jun 6, 2019

I don't like running tygon for impulse lines, it seems to get real soft when warm and I've had them blow off the case a few times or expand and no longer seal.

Moparmyway · Jun 6, 2019

srcarr52 said:
I don't like running tygon for impulse lines, it seems to get real soft when warm and I've had them blow off the case a few times or expand and no longer seal.

Agreed !
This Oregon line is different than Tygon, made for ethanol.

srcarr52 · Jun 6, 2019

Moparmyway said:
Agreed !
This Oregon line is different than Tygon, made for ethanol.

Pretty sure it was Oregon line that I had fail on me.

Lightning Performance · Jun 6, 2019

I tried every tygon on ms361 impulse line, fail.
Always got soft and you here it pop of at 15k. Crap I say!

I want one of your 395s tied to my mill one day. Your choice the 40 or the 60. Just for testing purposes of course ;-)

"Your pissing up a pole. Get that *s-word off of there and free hand this stuff."

Maybe I get to read this thread next month or two.

Moparmyway · Jun 6, 2019

Muffler mod time .............. not my favorite way to modify these, but the owners.
Brand new OEM ...........................

XP_Slinger · Jun 7, 2019

Moparmyway said:
Impulse goes here ......View attachment 184762 View attachment 184763
Time to make the throttle cable work
View attachment 184764
Most every 394 throttle cable I've used has needed a little help to get full throttle. This safety wire wont ever come off and doesnt ever get in the way
View attachment 184765 View attachment 184766

Safety wire...the mark of a USAF Vet. Love that stuff

Lightning Performance · Jun 7, 2019

XP_Slinger said:
Safety wire...the mark of a USAF Vet. Love that stuff

And drag racers got it from them.

srcarr52 · Jun 7, 2019

Lightning Performance said:
And drag racers got it from them.

Pfft! Drag racers stuff only has to hold 8 seconds.

You should see what loosens up during a 100 lap dirt race at a track like Knoxville, IA.

Lightning Performance · Jun 7, 2019

srcarr52 said:
Pfft! Drag racers stuff only has to hold 8 seconds.

You should see what loosens up during a 100 lap dirt race at a track like Knoxville, IA.

Dude, I've lost intake and header bolts in forty to forty five laps on asphalt. Fun stuffs!

RI Chevy · Jun 7, 2019

You driving a Hooskie Ken?

huskyboy · Jun 7, 2019

RI Chevy said:
You driving a Hooskie Ken?

Has your 262 lost any screws yet? Lol

RI Chevy · Jun 7, 2019

No comment!

huskyboy · Jun 7, 2019

RI Chevy · Jun 7, 2019

Moparmyway · Jun 8, 2019

New muffler mount bolts and that all important doo-hickey that keeps the top plastic from melting

Painted after muffler mod

Moparmyway · Jun 8, 2019

A sharp eye will see ......

I preferr the acorn nuts in stainless, makes it neater with M6x1.0, and the all important loctite

Trying to keep all fasteners the same is just about impossible ........

once again, a sharp eye is needed

Moparmyway · Jun 8, 2019

Needed more help than normal

Have the kill switch & standoffs on order, can make the standoffs if necessary

I preferr these Echo tank vents ....... still OEM

Was a Moe 394, now a Joe 395

Its just a saw

Mastermind Approved!

Pinnacle OPE Member

Shop rat, backyard slice cutter.

Its just a saw

Shop rat, backyard slice cutter.

Here For The Long Haul!

Its just a saw

They’re Just Saws

Here For The Long Haul!

Shop rat, backyard slice cutter.

Here For The Long Haul!

Mastermind Approved!

Sorta a husqvarna guy...

Mastermind Approved!

Sorta a husqvarna guy...

Mastermind Approved!

Its just a saw

Its just a saw

Its just a saw

Similar threads