ported 661 baffle in muffler vs baffle out

jmssaws said:

Your awful smart guy Scott and you know the John deere popping 661's are strong.
Will it matter what bar and chain and sprocket that's on it?
I post everything I can to help and to figure stuff out,why do you post every once in a while to tell people there wrong with no explanation.
I know what it is but I'm trying to figure out why it is.
This is a saw forum right?

Click to expand...

tree monkey said:

I flat out told you what was wrong with your saw.

and your trying to blow smoke up our asses saying your saw runs 13.100 in the cut, stock carb, no pipe, pump gas, and you don't own a tach to show it.

Click to expand...

tree monkey said:

it's like a restrictor plate. lol

Click to expand...

big t double said:

Sir...please leave my goats out of this. I have them broke in the way I like em. Scott...could you please install a pop in my 066. I like dr. pepper. K thanks bye.

Click to expand...

tree monkey said:

no I can't, but I can send it to jms saws for the installation

Click to expand...

Mastermind said:

It's popping because of the dead space above the base gasket. The space between the plate you installed, and the holes in the sides of the bore. Fill that space and it will stop.

Click to expand...

Mastermind said:

I'll rent you a pig now.

Click to expand...

tree monkey said:

I flat out told you what was wrong with your saw.

and your trying to blow smoke up our asses saying your saw runs 13.100 in the cut, stock carb, no pipe, pump gas, and you don't own a tach to show it.

Click to expand...

Coltont said:

Proofs in the puddin. But he ain't got no puddin.

Click to expand...

jmssaws said:

Do you think your saw is stronger than his?

Click to expand...

jmssaws said:

I have a cylinder that it's filled on,I had to dig it all out because it run poor.
It needs the extra volume
It still popped.
The only thing it can be is the mtronic because it stops after 30 seconds.
It's very easy to make never do it,all I have to do is take a little power away.
Screens in the muffler or less advance it stops. Again this is the 6th one and they all do it cold and when there right but as I've said and @Redfin and @trooney will say they learn and stop doing it but there not quite as strong.
It's not really a problem just annoys me.

Click to expand...

tree monkey said:

I flat out told you what was wrong with your saw.

and your trying to blow smoke up our asses saying your saw runs 13.100 in the cut, stock carb, no pipe, pump gas, and you don't own a tach to show it.

Click to expand...

jmssaws said:

Do you think your saw is stronger than his?

Click to expand...

tree monkey said:

didyou not say it does it on carb as well? and you still blame it on mtronic?

Click to expand...

jmssaws said:

And I told you your wrong and you are.
Why don't a 395 pop?
When I put a regular carb on it does that somehow fill the void and make it stop?
When I take power away does that change the porting?
I'm not arguing,I'm trying to learn.

Click to expand...

jmssaws said:

It doesn't it with a carb

Click to expand...

Mastermind said:

You are the only one that really worries about that.

I've been backing away from all I can get on these saws for years.

Building a solid workable saw is far more important that getting all you can. You'll see that one day.

Click to expand...