YouTube Video Help - Cir-Clips

[Vintage Engine Repairs]

Hey guys,

I’m working on my next YouTube video, it’s about how to install cir clips correctly, both with just a pick and also the correct oem tool. The only thing I don’t have is good images of damaged top ends from cir-clips that have let go.

If you have some and you’re happy for me to use them royalty free, can you please post them here?

Thanks.

 

[president]

Hey guys,

I’m working on my next YouTube video, it’s about how to install cir clips correctly, both with just a pick and also the correct oem tool. The only thing I don’t have is good images of damaged top ends from cir-clips that have let go.

If you have some and you’re happy for me to use them royalty free, can you please post them here?

Thanks.

Tom,you bought the oem installing tool did,nt you?

 

[Sauen]

I’m not sure what caused this damage as I found this cylinder in a box of bits, but it sure meant the end for a 10mm 044 somewhere.
Could be a circlip that came loose judging from the score on the transfer side.
Feel free to use these pictures if you feel these suit your needs!

 

[Vintage Engine Repairs]

Tom,you bought the oem installing tool did,nt you?

Hey mate, yes in 10mm and 12mm. Showing both the tool instal and using a pick in the video though.

 

[Vintage Engine Repairs]

I’m not sure what caused this damage as I found this cylinder in a box of bits, but it sure meant the end for a 10mm 044 somewhere.
Could be a circlip that came loose judging from the score on the transfer side.
Feel free to use these pictures if you feel these suit your needs!

Thank you! Although the video has been edited and uploaded I may re upload it with that in there. Either way, thanks I’ll share the video here when done!