Yet again .... JMSSAWS strikes

[Moparmyway]

No worries there bud. I doubt he touched much of the saw. That was just more lies.

But we MUST check, none the less, so we will !

I'm sorry I ever backed this guy up in any way. I guess it's just inconceivable that anyone would act like this, because the end result is always bad for all.

As am I ............... saddened and angry all at the same time in myself and the whole situation.
I've been in a group text with him for over a year, I even called @Mastermind at one time to ask that Jason be re-instated here.
Thank God that Randy held his ground then.

Kev, I'd love to help you fix this saw, but I know you have all the tools and skills needed. I've got no problem tossing some cash in for the new P&C.

@big t double has taken care of every OEM part that @sawmikaze will need Doc, but thank you for your offer.

Drug use has to be involved here. At a loss for words.

At this point if its not drug induced decisions that caused all of this crap ..................... I shudder to think what could possibly allow someone to think that this crap is OK

 

[sawmikaze]

I normally just read these threads since I never dealt with or even talked to Jason, but this is one of worst deals I've seen yet, apart from the guys who won't get anything back.

I wish i could like that.

Bring back the dislike button please.

 

[T.Roller]

I wish i could like that.

Bring back the dislike button please.

+1

 

[Wilhelm]

. . . At this point if its not drug induced decisions that caused all of this crap ..................... I shudder to think what could possibly allow someone to think that this crap is OK

Human nature - the bad part of it!

 

[sawmikaze]

Anyone still feel sorry that strapon had to tell his wife he lost his means ? .. i feel sorry for anyone that bought into that phony half assed story/apology on AS.

 

[Deputyrpa]

Unbelievable! Fortunately, the magnitude of incompetence & deceit has been completely eclipsed by the good will of Opeforum members.

We are human, and have to trust first, but verify later. Some people put on a really good show. Like I told my single brother - watch out for hair under the pantyhose!

 

[sawmikaze]

Unbelievable! Fortunately, the magnitude of incompetence & deceit has been completely eclipsed by the good will of Opeforum members.

We are human, and have to trust first, but verify later. Some people put on a really good show. Like I told my single brother - watch out for hair under the pantyhose!

I know im a little different than the regular online chainsaw fan..

But where i came up you verify yourself before anyone trusts you...

 

[Wilhelm]

Shoot first, ask questions later.

It is easier to ask forgiveness than it is to get permission.

I bet there are a lot more . . .

 

[Sty57]

You should see what he told me when when the original jug got tore up from the aftermarket pin bearing.

Then he put this piece of *s-word on it.

But again..i wasn't supposed to be pissed off and keep my mouth shut and just deal with jason directly...

My question is........why was he using an AM pin bearing if this saw was new and unfueled?

 

[sawmikaze]

My question is........why was he using an AM pin bearing if this saw was new and unfueled?

Good Question.

 

[CapitaineHaddoc]

My question is........why was he using an AM pin bearing if this saw was new and unfueled?

I bet the original one is on another saw right now.

 

[Frank bierce]

My question is........why was he using an AM pin bearing if this saw was new and unfueled?

"His" saws, I'm sure, have bran--spankin new oem parts in them.

 

[Sty57]

"His" saws, I'm sure, have bran--spankin new oem parts in them.

Ohhhh ya I forgot......he put all the best stuff in his personal saws. But then got talked out of it for $1500.........What a POS, how in the Hell can a person like this even look in a mirror?

 

[Stump Shot]

If a 288 piston is used a 288 wrist pin bearing must be used as it is wider.

Not that I believe that cock and bull story about it breaking to begin with. That cylinder was scammed pure and simple.

 

[sawmikaze]

If a 288 piston is used a 288 wrist pin bearing must be used as it is wider.

Not that I believe that cock and bull story about it breaking to begin with. That cylinder was scammed pure and simple.

Actually it did break , my original cylinder was eaten up from it breaking...this current piece of sh!t cylinder was my prize for that.

@Glock37 was the first one to tear into this saw.

 

[CapitaineHaddoc]

Actually it did break , my original cylinder was eaten up from it breaking...this current piece of sh!t cylinder was my prize for that.

Is this what Jason told you, or did you see it by yourself?

 

[sawmikaze]

Is this what Jason told you, or did you see it by yourself?

I saw it after my new saw quit running after just a few tanks of gas..powder mike tore it down to see what the hell happened and called me...i had to go pick the saw up while it was still tore apart and send it back to jason.

 

[CapitaineHaddoc]

I saw it after my new saw quit running after just a few tanks of gas..powder mike tore it down to see what the hell happened and called me...i had to go pick the saw up while it was still tore apart and send it back to jason.

Dammit. At first, Jason told me he'll use a 288 piston for my friend's cylinder. Glad he didn't.

But my friend told me recently this 660 was the strongest he ever had (he owned 3 or 4 of them. The cylinder I sent to Jason was probably a very good one. I bet it wasn't lost by USPS.

 

[Mastermind]

View attachment 83965

Yep. JMS needs some jail time.

I even called @Mastermind at one time to ask that Jason be re-instated here.
Thank God that Randy held his ground then.

I didn't buy his story about the Alaska saws. I texted back and forth with him for a few days, and decided that he was as *f-worded up as a soup sandwich.

Then I simply followed my gut....

 

[Stump Shot]

Actually it did break , my original cylinder was eaten up from it breaking...this current piece of sh!t cylinder was my prize for that.

@Glock37 was the first one to tear into this saw.

Oh something was broke... are you sure 100% it was yours. Hard to keep up with the shell game being played.

Then again if it was put in a bind, it's entirely plausible. I just have a hard time believing that.

So it's down to incompetence, skullduggery or both, either way not cool.



I will say just like I did to Dallas @dall about his saw, just think how nice it is going to feel when you finally have it right. Might have been a long ride to get there, but the finish line is in sight brother, hang on it's almost over. You're going to like having one done right and will last.